| auszookers.com https://auszookers.com/forum/ |
|
| Driveshaft question https://auszookers.com/forum/viewtopic.php?f=5&t=37872 |
Page 1 of 1 |
| Author: | zukmeista [ Fri Dec 21, 2012 4:29 pm ] |
| Post subject: | Driveshaft question |
I have bought a LWB SJ410, but it has no driveshafts. What will fit/what are the differences between models? Will Maruti shafts fit? |
|
| Author: | mrw82 [ Fri Dec 21, 2012 9:53 pm ] |
| Post subject: | Re: Driveshaft question |
Front shaft and jack shaft can be used from a swb sierra (sj410) but the rear will need to come from a lwb. Not sure on maruti, I assume they would be ok being 1 litre, but Suzuki/maruti have been known to do strange things... |
|
| Author: | 303zuke [ Sat Dec 22, 2012 2:13 pm ] |
| Post subject: | Re: Driveshaft question |
You need to provide more info. There are 3 types of SJ410, with different pinion flange bolt patterns. The Type 3 is the same as a NT 1.3 Sierra or Drover and also NT Maruti. The Type 1 and 2 have a different flange pattern, the same as LJ50/80/81, but the shaft lengths are all different. |
|
| Author: | zukmeista [ Sat Dec 22, 2012 2:31 pm ] |
| Post subject: | Re: Driveshaft question |
I haven't got it yet, I'm still waiting for the transport people to bring it to me. |
|
| Author: | Mickc [ Sun Dec 23, 2012 9:44 pm ] |
| Post subject: | Re: Driveshaft question |
NT Maruti as have a shorter jack shaft with NT flange |
|
| Author: | 303zuke [ Mon Dec 24, 2012 9:30 pm ] |
| Post subject: | Re: Driveshaft question |
Mickc wrote: NT Maruti as have a shorter jack shaft with NT flange So the NT Maruti has a shorter Jackshaft than a Type 3 SJ410?? Interesting. |
|
| Author: | mrw82 [ Tue Dec 25, 2012 8:38 pm ] |
| Post subject: | Re: Driveshaft question |
I would have said maruti same jackshaft as a type 3 sierra. I thought maruti ran the type 3 gearbox. And for my type 3 / 5 speed conversion I used a 1.3 jackshaft with a 1 litre flange on transfer case end. Length is spot on, which makes sense given that everything dimensionally about the type 3 is same as 1.3 (except Bell housing) |
|
| Author: | Mickc [ Wed Dec 26, 2012 10:23 pm ] |
| Post subject: | Re: Driveshaft question |
I thought Maruti was the same untill I worked out why my G16b conversion was hitting the firewall. The F10 Maruti gearbox is mounted about 15 to 20mm back than a 1.3. Moving engine and box foward to clear I noticed the difference in jack shaft position. Probably could have risked and used it, as a fair bit of splines was still engaged |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|