| auszookers.com https://auszookers.com/forum/ |
|
| G16B Automatic 4 Speed Headers? https://auszookers.com/forum/viewtopic.php?f=5&t=37950 |
Page 1 of 1 |
| Author: | remickz [ Thu Dec 27, 2012 6:38 pm ] |
| Post subject: | G16B Automatic 4 Speed Headers? |
Hey Guys, Started stripping the engine bay back to fix an oil leak, and found i had a cracked header (original). I have removed the headers, but now i need to find a new set. Does anyone recommend a good brand / shop to buy from? Most i see on eBay are for Manuals only; i have seen AT before, but not at the moment. Any help is appreciated. |
|
| Author: | Gwagensteve [ Thu Dec 27, 2012 6:41 pm ] |
| Post subject: | Re: G16B Automatic 4 Speed Headers? |
I don't understand why they would be significantly different? I have wildcat headers on my my car and from memory there's only one part #. They clear both the 4 speed auto and three speed auto. Steve. |
|
| Author: | Fatzook [ Thu Dec 27, 2012 6:47 pm ] |
| Post subject: | Re: G16B Automatic 4 Speed Headers? |
I fitted these >>>> http://www.ebay.com.au/itm/Suzuki-Vitara-EFI-1600-G16B-91-94-4WD-4cyl-Petrol-Extractor-Header-/360545272508?pt=AU_Car_Parts_Accessories&hash=item53f22c42bc to a sierra with G16B and auto without issue. Can't see why they would only fit a manual. Send them a message and ask why they are manual only. I know that the J20 extractors can be transmission specific, as they run a clutch slave cylinder on the manuals, which takes up valuable pipe room. But the 1.6 has no such issue. |
|
| Author: | remickz [ Thu Dec 27, 2012 7:03 pm ] |
| Post subject: | Re: G16B Automatic 4 Speed Headers? |
Thanks a lot guys. I have emailed those guys fatzook, hopefully i will hear from them in the morning. I will search around for some wildcat ones now as well. |
|
| Author: | remickz [ Thu Dec 27, 2012 8:58 pm ] |
| Post subject: | Re: G16B Automatic 4 Speed Headers? |
Just got a response from the Ebay guys, the only fitment issues between Auto and Manual is that the AT has a 2 bolt flange, and the MT has the 3 bolt flange on the bottom end of the header, besides that they said it should fit. And as a bonus, my Vitara has the 3 bolt flange anyway, so no idea whats happening there. |
|
| Author: | Fatzook [ Thu Dec 27, 2012 9:12 pm ] |
| Post subject: | Re: G16B Automatic 4 Speed Headers? |
Well thats certainly not an insurmountable problem. |
|
| Author: | Wazz [ Thu Dec 27, 2012 10:33 pm ] |
| Post subject: | Re: G16B Automatic 4 Speed Headers? |
Where are you located? I think i got a good std manifold from my left overs |
|
| Author: | tsock0 [ Sat Dec 29, 2012 7:22 pm ] |
| Post subject: | Re: G16B Automatic 4 Speed Headers? |
yeah i bought the ones off ebay for my vitara auto . perfect fit my auto also used the 3 hole flange im happy for the price i think they were like $190 posted |
|
| Author: | remickz [ Sat Dec 29, 2012 8:41 pm ] |
| Post subject: | Re: G16B Automatic 4 Speed Headers? |
Yeah i bought them on Friday, hopefully they make it too me next week sometime, no real drama as I have another car, so im not halfway through oil and filter, coolant flush and new radiator hoses, drive shaft replacement, and now headers replaced. Thanks for your offer Wazz, but i think i will stick with the new ones, so cheap anyway. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|