| auszookers.com https://auszookers.com/forum/ |
|
| Bush Winch / Wheel Winch https://auszookers.com/forum/viewtopic.php?f=5&t=38015 |
Page 1 of 1 |
| Author: | oohsam [ Mon Dec 31, 2012 12:10 pm ] |
| Post subject: | Bush Winch / Wheel Winch |
Hey guys, As I just bought a winch I was looking up winching techniques etc stumbled accross this video. I reckon its a great idea, comes with its pros and cons ofcourse, just thought I'd post for you blokes to have a look-see ! Sorry if its a repost, I couldnt find it in search. |
|
| Author: | sideways [ Mon Dec 31, 2012 12:19 pm ] |
| Post subject: | Re: Bush Winch / Wheel Winch |
I didn't watch the video but I know what it is. Worlds stupidest idea. How do you plan to fit it when you're in 2ft of mud? How often do you get a winching point in the very specific place that these need? |
|
| Author: | Fatzook [ Mon Dec 31, 2012 12:25 pm ] |
| Post subject: | Re: Bush Winch / Wheel Winch |
Looks like a well thought out product. @Sideways. Watch the vid. looks easy to fit. Shovel some mud away from the wheel, and use the well designed ground anchor like they suggest. |
|
| Author: | oohsam [ Mon Dec 31, 2012 12:28 pm ] |
| Post subject: | Re: Bush Winch / Wheel Winch |
Haters gonnna hate. I like seeing people innovate and think outside the box. The ground anchors are a nice design too |
|
| Author: | Gwagensteve [ Mon Dec 31, 2012 12:49 pm ] |
| Post subject: | Re: Bush Winch / Wheel Winch |
This isn't thinking out side the box. This idea is as old as the motor car. It's not something I'd run, but it's not new or innovative. In fact, early military hummers ran lugs on the hubs that (I think) the wheel brace could be threaded into to use like this. Steve |
|
| Author: | tonyevans [ Tue Jan 01, 2013 10:38 am ] |
| Post subject: | Re: Bush Winch / Wheel Winch |
Looks like the drum we used to run the bush saw off |
|
| Author: | want33s [ Tue Jan 01, 2013 1:18 pm ] |
| Post subject: | Re: Bush Winch / Wheel Winch |
While the product might work in particular circumstances, that video is a crock. Look at about 3:02 and you'll see the ute driving up the washout with the rope slack and getting caught on the LHF tyre sidebiters. A slack rope will never move a vehicle. I would much prefer an electric or PTO winch. The other thing not mentioned in the vid is how does this work on open diffs? The wheel with less load IE: wheel without rope attached will spin, and the winch drum will stop. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|