| auszookers.com https://auszookers.com/forum/ |
|
| starter motors https://auszookers.com/forum/viewtopic.php?f=5&t=3807 |
Page 1 of 1 |
| Author: | _noddy [ Tue Jan 13, 2009 3:37 am ] |
| Post subject: | starter motors |
Does 1 liter starter motor fit a 1.3 g13b is what i got now????? |
|
| Author: | BlueSuzy [ Tue Jan 13, 2009 5:12 am ] |
| Post subject: | Re: starter motors |
Does a f10a 1 litre starter motor fit a g13b 1.3 is what i got now????? (cannot translate) I doubt a 1L starter will fit a 1.3 block. But a mitsubishi lancer starter is the same as a 1.3 sierra one.. So i can be wrong |
|
| Author: | tonka_zook [ Tue Jan 13, 2009 12:12 pm ] |
| Post subject: | Re: starter motors |
no they are different, i needed a new starter for my 1.3L when i still had my 1L and tryed it and no go, if i remember i think the end that goes in to the fly wheel is longer on the 1L |
|
| Author: | TheRAWPrAwN79 [ Tue Jan 13, 2009 2:05 pm ] |
| Post subject: | Re: starter motors |
Hi Guys, Im looking for a replacement starter motor for a SJ80/G13BA. Can you give us a quick run down on the interchangeable starters I can use/look for and whether or not its something you can do yourself. Also, if I bang on it a bit aaaand - would an bigger than average battery have caused the starter motor any damage?, Im usually a 3-5 sec ignition turner if that factors in at all. |
|
| Author: | BlueSuzy [ Tue Jan 13, 2009 2:27 pm ] |
| Post subject: | Re: starter motors |
Shouldent matter, I think we all have a bigger battery then the pissy stock one. My starter was not extending out to start.. I pulled it apart, regreased the little swing arm, And gave it all a clean. Works like a treat. Then after one start it wouldnt work again! Pulled it out... Checked it and the gear that swings out works like a ratchet action. It snapped!, So i got another from a mitsubishi lancer (thats how i know they will fit) Picknpay is where i shop. Take your starter there and match a new one. The swifts dont fit |
|
| Author: | shep [ Tue Jan 13, 2009 3:05 pm ] |
| Post subject: | Re: starter motors |
what model lancer mate. |
|
| Author: | BlueSuzy [ Tue Jan 13, 2009 3:06 pm ] |
| Post subject: | Re: starter motors |
fwd but was one of the first ones. (4door hatch ?)I cant remember, was about 1yr ago.. |
|
| Author: | TheRAWPrAwN79 [ Thu Jan 15, 2009 2:09 pm ] |
| Post subject: | Re: starter motors |
okay, after some research I found the following options: brand new starter of ebay : $210 inc postage http://cgi.ebay.com.au/Brand-New-Starter-Motor-Holden-Barina-Suzuki-Swift_W0QQitemZ360118432802QQcmdZViewItemQQptZAU_Car_Parts_Accessories?_trksid=p3286.m20.l1116 brand new starter from Suzistore: $264 incl postage http://www.suzistore.com.au/shopexd.asp?id=641 or probably from the wreckers... $120?? local pick up anyone else got any figures they can throw in? |
|
| Author: | mrw82 [ Thu Jan 15, 2009 10:42 pm ] |
| Post subject: | Re: starter motors |
pull yours apart, clean it up. get any worn out/broken bits replaced from an auto leckie. = cheap as. be less then $50 or if theres nothing broken and its just caked up with mud it'll cost nothing. I have a good one to suit a 1 litre if anyone needs one. |
|
| Author: | TheRAWPrAwN79 [ Fri Jan 16, 2009 4:30 pm ] |
| Post subject: | Re: starter motors |
well I decided to have a look at taking the starter out then changed my mind and decided to clean the connections first to see if that helped at all. Well, the socket wrench extension bridged the gaps between the two bolts off the soloniod part(?) and the housing shell of the starter motor and it whizzed to life There is an immobiliser installed but it activates/deactivates with no quams but still nothing (except the 'reds') happens when I turn the key. Im really scratching my head as to what to do as the dollars are really scarce these days and every decision has to be bare bones and correct |
|
| Author: | MUD-PIG [ Fri Jan 16, 2009 4:47 pm ] |
| Post subject: | Re: starter motors |
My Sierra had a 1L starter motor in it takes a spacer bracket to be made and the butchering of the starter motor def not worth the trouble. When it came time to replace I went and got a 1.3 Starter. |
|
| Author: | kenn [ Sat Jan 17, 2009 1:11 am ] |
| Post subject: | Re: starter motors |
if bridging the terminals made the starter work then your solenoid is the problem , check that you have power to your start wire(the small wire conected to the spade terminal )when you tern the key to start,if so then it's your solenoid.good luck. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|