No you cannot have my engine. I don't care how many times you ask. Thankyou very much sir.
| auszookers.com https://auszookers.com/forum/ |
|
| South australian engine conversions https://auszookers.com/forum/viewtopic.php?f=5&t=38217 |
Page 1 of 1 |
| Author: | McBane [ Wed Jan 09, 2013 12:52 pm ] |
| Post subject: | South australian engine conversions |
Has anybody recently done an engine conversion in SA and got it legal? whats the process here |
|
| Author: | Poita [ Wed Jan 09, 2013 1:45 pm ] |
| Post subject: | Re: South australian engine conversions |
If its the same size (ie 1.6 carby to 1.6 EFI) it's easy. You just ring them and give them the new engine number. If you are increasing in size you need to book an appointment with Regency to get it road worthied. It will also pay to ring them as they may require you (depending on the conversion) to upgrade the brakes. |
|
| Author: | VonDecoy [ Wed Jan 09, 2013 7:18 pm ] |
| Post subject: | Re: South australian engine conversions |
No you cannot have my engine. I don't care how many times you ask. Thankyou very much sir.
|
|
| Author: | atari4x4 [ Wed Jan 09, 2013 7:36 pm ] |
| Post subject: | Re: South australian engine conversions |
NFI, ring regency if you wish but you probably wont get a straight answer. also what engine into what vehicle would help, 1.3-1.6 would just be a numbers change from memory. |
|
| Author: | McBane [ Wed Jan 09, 2013 7:45 pm ] |
| Post subject: | Re: South australian engine conversions |
I found a M15 cheep and a all the other gaff required so keep ya old lump! M15 into a WT sierra (88.5) |
|
| Author: | VonDecoy [ Wed Jan 09, 2013 8:58 pm ] |
| Post subject: | Re: South australian engine conversions |
Bah, mongrel. |
|
| Author: | Polar_Bear [ Wed Jan 09, 2013 10:14 pm ] |
| Post subject: | Re: South australian engine conversions |
atari4x4 wrote: NFI, ring regency if you wish but you probably wont get a straight answer. X2 if you ring up 3 separate times you will get 3different answers  Just take itdown to the one at lonsdale to get an identity check with the new engine and act dumb.....worked for me 
|
|
| Author: | atari4x4 [ Wed Jan 09, 2013 10:34 pm ] |
| Post subject: | Re: South australian engine conversions |
do what the rest of SA does... keep the old block, do nothing & run the gauntlet |
|
| Author: | suzkboy [ Thu Jan 10, 2013 6:42 pm ] |
| Post subject: | Re: South australian engine conversions |
That never happens Gus  who would do that.
|
|
| Author: | Chop [ Thu Jan 10, 2013 7:40 pm ] |
| Post subject: | Re: South australian engine conversions |
A G16A looks like a G13BA to me
|
|
| Author: | suzkboy [ Thu Jan 10, 2013 7:45 pm ] |
| Post subject: | Re: South australian engine conversions |
M18 looks like a m13 too 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|