| auszookers.com https://auszookers.com/forum/ |
|
| Bigger oil filter.. 1.3 litre engine https://auszookers.com/forum/viewtopic.php?f=5&t=38246 |
Page 1 of 1 |
| Author: | foolsp33d [ Fri Jan 11, 2013 7:24 am ] |
| Post subject: | Bigger oil filter.. 1.3 litre engine |
Just after the PN for the higher capacity oil filter for a G13. motor.. cant recall it off the top of my head... Might as well suggest some engine oil while you reply! Mucho Gratis! |
|
| Author: | zukmeista [ Fri Jan 11, 2013 7:32 am ] |
| Post subject: | Re: bigger oil filer.. 1.3 litre engine |
Small: Z125 Medium: Z416 Large: Z172 Oil: Something made by Penrite. |
|
| Author: | foolsp33d [ Fri Jan 11, 2013 8:20 am ] |
| Post subject: | Re: bigger oil filer.. 1.3 litre engine |
So its currently running a BZ125.. which is the short stumpy style... looking for the interchangeability to the slightly larger one... Anyone!?? |
|
| Author: | Shandy [ Fri Jan 11, 2013 8:28 am ] |
| Post subject: | Re: bigger oil filer.. 1.3 litre engine |
I believe a z89a will fit. Same with a z418 of many toyotas. The thread is 3/4 16 IIRC. |
|
| Author: | Jester [ Fri Jan 11, 2013 9:07 am ] |
| Post subject: | Re: bigger oil filer.. 1.3 litre engine |
I just run the Z418, cheapest about, cos they are so common, its certainly big enough toyota put em on 4L sixes |
|
| Author: | atari4x4 [ Fri Jan 11, 2013 9:29 am ] |
| Post subject: | Re: bigger oil filer.. 1.3 litre engine |
Z172 should also fit & is quite a bit larger again compared to the Z418 |
|
| Author: | Teracis [ Fri Jan 11, 2013 12:35 pm ] |
| Post subject: | Re: bigger oil filer.. 1.3 litre engine |
Did you lot just miss zukmeista's post with 3 good part numbers? |
|
| Author: | atari4x4 [ Fri Jan 11, 2013 12:43 pm ] |
| Post subject: | Re: bigger oil filer.. 1.3 litre engine |
obviously that is a tubby troll is on my ignore listEDIT: it appears he's also in the moderated list so his posts need to be approved & i guess it got signed off late looking at foolsp33ds 2nd post. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|