| auszookers.com https://auszookers.com/forum/ |
|
| Transfer noise https://auszookers.com/forum/viewtopic.php?f=5&t=38421 |
Page 1 of 1 |
| Author: | Davidmacca [ Thu Jan 17, 2013 9:27 pm ] |
| Post subject: | Transfer noise |
I have a swb vitara and when I back off their is a bearing noise/ chatter kind of noise sounds like its coming from transfer, just wondering if it would be the bearing in back of transfer where tailshaft goes into. Any info would be great thanks Dave |
|
| Author: | atari4x4 [ Thu Jan 17, 2013 9:28 pm ] |
| Post subject: | Re: Transfer noise |
checked the uni joints? |
|
| Author: | Davidmacca [ Thu Jan 17, 2013 10:52 pm ] |
| Post subject: | Re: Transfer noise |
No I haven't checked over them properly will do in the morning thanks |
|
| Author: | christover1 [ Fri Jan 18, 2013 7:08 am ] |
| Post subject: | Re: Transfer noise |
That can be a CAT problem, or its mountings. If its transfer related, can you feel it through the stick? |
|
| Author: | Davidmacca [ Fri Jan 18, 2013 10:20 am ] |
| Post subject: | Re: Transfer noise |
Yer when I back off and hold the stick I can feel it |
|
| Author: | christover1 [ Fri Jan 18, 2013 10:29 am ] |
| Post subject: | Re: Transfer noise |
Davidmacca wrote: Yer when I back off and hold the stick I can feel it Most likely is a driveline problem then. But can be a tranny mount problem, causing vibes or rubbings on steel. Hopefully a simple problem. |
|
| Author: | nato78 [ Sat Jan 19, 2013 10:44 am ] |
| Post subject: | Re: Transfer noise |
Engine mount? You'll feel that through the stick under load |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|