| auszookers.com https://auszookers.com/forum/ |
|
| fireing line https://auszookers.com/forum/viewtopic.php?f=5&t=3847 |
Page 1 of 1 |
| Author: | _noddy [ Sat Jan 17, 2009 4:34 am ] |
| Post subject: | fireing line |
Does any one know the fireing line for a 1.3 where do the sparkplug leads go ???? |
|
| Author: | Mike [ Sat Jan 17, 2009 4:38 am ] |
| Post subject: | Re: fireing line |
you mean firing order? its on the the dizzy cap |
|
| Author: | _noddy [ Sat Jan 17, 2009 4:42 am ] |
| Post subject: | Re: fireing line |
ok i will check that out |
|
| Author: | Damo [ Sat Jan 17, 2009 12:29 pm ] |
| Post subject: | Re: fireing line |
Firing order should be 1-3-4-2. If you have the leads in the correct order then check that your distributor isn't 180 degrees out. Eg, when piston 1 is at TDC (top dead centre) the rotor button should be lined up with number 1 lead on the distributor cap. If it's 180 deg. out it will be pointing at number 4 lead. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|