| auszookers.com https://auszookers.com/forum/ |
|
| GV Rear Wheel Bearings Needed...Any Suggestions? https://auszookers.com/forum/viewtopic.php?f=5&t=38504 |
Page 1 of 1 |
| Author: | schmiffee [ Tue Jan 22, 2013 2:51 pm ] |
| Post subject: | GV Rear Wheel Bearings Needed...Any Suggestions? |
It appears that I need rear-wheel bearing on my GV, and as this is my first 4x4, are there any suggestions as to other modifications that can be done while these parts are off? I was given the impression by the mechanics that the bearings would need to be pressed out and therefore better to be done by a shop. Would this be correct? I was also quoted by Global Auto that the bearings would be about $88 per side...does this sound about right? Thanks for your help. |
|
| Author: | Gwagensteve [ Tue Jan 22, 2013 2:57 pm ] |
| Post subject: | Re: GV Rear Wheel Bearings Needed...Any Suggestions? |
No, yes and yes. There's no obvious modification to do while the axles are out. If you were looking to install a locker, it's not a bad time, but it really won't save all that much cash by doing it along with the bearings. If you're unfamiliar with heavyish mechanical work, I wouldn't do them myself. I think $88 per side for a bearing and seal probably isn't too far off the money. Steve. |
|
| Author: | schmiffee [ Tue Jan 22, 2013 3:46 pm ] |
| Post subject: | Re: GV Rear Wheel Bearings Needed...Any Suggestions? |
Thanks Steve. That's the affirmation I needed. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|