| auszookers.com https://auszookers.com/forum/ |
|
| haynes manuals https://auszookers.com/forum/viewtopic.php?f=5&t=38589 |
Page 1 of 1 |
| Author: | OMEGA [ Sat Jan 26, 2013 7:50 pm ] |
| Post subject: | haynes manuals |
First of all happy strayla day fellows zookers, just a quick one, doin some repairs on my vit and sierra at the moment and as I have 2 cars in bits I can't remember everything, just wanted to know if anyone that has the vit/sierra Haynes manual found it as a good guide or is it useless? |
|
| Author: | atari4x4 [ Sat Jan 26, 2013 8:00 pm ] |
| Post subject: | Re: haynes manuals |
they're good for wiping greasy prints on the pages... that's about it. from the ones i've seen there is very little in the way of detail in them & they're a bit like pointing & saying it's "that" way to a blind man. you're better off chasing down a copy of the FSM (Factory Service Manual). www.suzukiinfo.com would be one place to start. 
|
|
| Author: | OMEGA [ Sat Jan 26, 2013 8:23 pm ] |
| Post subject: | Re: haynes manuals |
Cheers atari, had one years ago can't remember what for.but remember whatever I wanted to know it never seemed to be there, hey just out of curiousity from previous posts were you a bit of a rotor fan back in the day? |
|
| Author: | atari4x4 [ Sat Jan 26, 2013 8:26 pm ] |
| Post subject: | Re: haynes manuals |
if aliens were to invent a horse power machine... it would be a rotary engine. |
|
| Author: | OMEGA [ Sat Jan 26, 2013 9:23 pm ] |
| Post subject: | Re: haynes manuals |
I was thinking that would be your answer in a round about way, what one of my vehicles can have pretty much anything within reason bolted forwards of the transfer case into it? Whaddya reckon? |
|
| Author: | atari4x4 [ Sat Jan 26, 2013 9:26 pm ] |
| Post subject: | Re: haynes manuals |
3GSE BEAMS http://en.wikipedia.org/wiki/Toyota_S_engine |
|
| Author: | OMEGA [ Sat Jan 26, 2013 9:36 pm ] |
| Post subject: | Re: haynes manuals |
Really!? |
|
| Author: | atari4x4 [ Sat Jan 26, 2013 9:46 pm ] |
| Post subject: | Re: haynes manuals |
why not, 150+kw out of a reliable stock toyota n/a engine? |
|
| Author: | OMEGA [ Sat Jan 26, 2013 10:02 pm ] |
| Post subject: | Re: haynes manuals |
true, is a good donk, but would not be my weapon of choice. |
|
| Author: | atari4x4 [ Sat Jan 26, 2013 10:11 pm ] |
| Post subject: | Re: haynes manuals |
is this a pipe dream thread or reality... why not 1UZ-FTE, GM LS6? |
|
| Author: | OMEGA [ Sat Jan 26, 2013 10:45 pm ] |
| Post subject: | Re: haynes manuals |
was just thinking something small lightweight and simple with good grunt, more.than a modded.g13 anyways, donk in the sierra has .o compression on no.1 the rest have 150, should I fix or start a.project? |
|
| Author: | atari4x4 [ Sat Jan 26, 2013 10:49 pm ] |
| Post subject: | Re: haynes manuals |
buy my cup holder if you want an engine to put into a sierra. viewtopic.php?f=7&t=35132&hilit=cup+holder |
|
| Author: | Gwagensteve [ Sun Jan 27, 2013 6:54 am ] |
| Post subject: | Re: haynes manuals |
X2 Haynes manuals are rubbish. I reckon they make most jobs harder because they're so confusing. FSM FTW 
|
|
| Author: | alexxx [ Sun Jan 27, 2013 7:06 am ] |
| Post subject: | Re: haynes manuals |
X3. I'll happily sell you one though |
|
| Author: | OMEGA [ Sun Jan 27, 2013 7:58 am ] |
| Post subject: | Re: haynes manuals |
I spose the only place to get a FSM would be from Suzuki, better remove my left nut then and put it on the black market so I can afford it! |
|
| Author: | Gwagensteve [ Sun Jan 27, 2013 8:05 am ] |
| Post subject: | Re: haynes manuals |
There are sources for them on line. I don't know what Suzuki charge for them. Might be cheap at any price though if it saves you stuffing something up or having to take your car to a workshop to get fixed. Steve. |
|
| Author: | OMEGA [ Sun Jan 27, 2013 9:01 am ] |
| Post subject: | Re: haynes manuals |
Yeah cheers steve i was just taking the piss 50 bux or so for.a good manual to use as a guide is far cheaper than a small fuk up that can cause a big problem, and end up costing a lot more than a pineapple! |
|
| Author: | Gwagensteve [ Sun Jan 27, 2013 9:20 am ] |
| Post subject: | Re: haynes manuals |
Oh, I think they're a touch more than $50  I didn't buy any of the ones I have though. Steve. |
|
| Author: | OMEGA [ Sun Jan 27, 2013 4:00 pm ] |
| Post subject: | Re: haynes manuals |
Had a quik squiz on egay, there are a heap of so called FSM's on discs for under 10 bux? Anyone ever bought one of these, I should just order one if it was shite, hey its only 10 bux. |
|
| Author: | atari4x4 [ Sun Jan 27, 2013 4:07 pm ] |
| Post subject: | Re: haynes manuals |
atari4x4 wrote: http://www.suzukiinfo.com would be one place to start.
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|