Get a Swift/barina polyvee crank and water pump pulley.
And a 110A alternator
| auszookers.com https://auszookers.com/forum/ |
|
| 80 amp denso alternator https://auszookers.com/forum/viewtopic.php?f=5&t=38746 |
Page 1 of 1 |
| Author: | skelly [ Sun Feb 03, 2013 7:27 pm ] |
| Post subject: | 80 amp denso alternator |
I've decided to go with an 80 amp denso alternator (101211) to replace The 40 amp stock denso in my Sierra. Only prob is that the pics On eBay look like the 80 amp one is a Multi groove and the stock One I have is a single. Would it be fine to swap the Multi grove for A single so it lines up with the crank ad water pump pulley? The only Reason I ask this is be cause I think the reason for Multi grooves are For less slippage. Just wondering if the 80amp alternator will be too hard To turn with just a single pulley. Cheers Skel |
|
| Author: | fritter [ Mon Feb 04, 2013 1:48 pm ] |
| Post subject: | Re: 80 amp denso alternator |
The 110 amp falcon alternator might be a better option. I have one on my Vitara and it works well. Have a read through this: viewtopic.php?f=17&t=5529 |
|
| Author: | Gwagensteve [ Mon Feb 04, 2013 2:13 pm ] |
| Post subject: | Re: 80 amp denso alternator |
Get a Swift/barina polyvee crank and water pump pulley. And a 110A alternator
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|