| auszookers.com https://auszookers.com/forum/ |
|
| corolla engine into a 1l!! what has to be done https://auszookers.com/forum/viewtopic.php?f=5&t=38861 |
Page 1 of 1 |
| Author: | JIMNY_CRICKET [ Fri Feb 08, 2013 11:54 am ] |
| Post subject: | corolla engine into a 1l!! what has to be done |
hi i blew up my 1l quite well beyond the means of repair so i was thinking people usto put corolla engines into them is it a straight bolt in or whats the go |
|
| Author: | sideways [ Fri Feb 08, 2013 12:11 pm ] |
| Post subject: | Re: corolla engine into a 1l!! what has to be done |
By no means a straght bolt in. I believe dellow still sell the kit to do the conversion but it wont be cheap. Seriously, just put another 1l in it. You could put a 1.3 in it but even that requires a bit of fab work. |
|
| Author: | Fatzook [ Fri Feb 08, 2013 12:16 pm ] |
| Post subject: | Re: corolla engine into a 1l!! what has to be done |
I've never done the conversion, but AFAIK, it is NOT a bolt in job. More importantly, its one of the most antiquated conversions going. You'd be better off tracking down another 1L. Or looking into G13/G16 swaps. |
|
| Author: | Gwagensteve [ Fri Feb 08, 2013 12:43 pm ] |
| Post subject: | Re: corolla engine into a 1l!! what has to be done |
Wot FZ said. Nice conversion in 1984, not much point now. Steve. |
|
| Author: | JIMNY_CRICKET [ Sat Feb 09, 2013 9:38 am ] |
| Post subject: | Re: corolla engine into a 1l!! what has to be done |
ok so im just guna get another 1l |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|