pretty sure it's all in that thread
| auszookers.com https://auszookers.com/forum/ |
|
| Gti into sierra wiring details https://auszookers.com/forum/viewtopic.php?f=5&t=39003 |
Page 1 of 1 |
| Author: | billygoat [ Thu Feb 14, 2013 7:24 pm ] |
| Post subject: | Gti into sierra wiring details |
I am starting a gti conversion into my Sierra in a few weeks & I am getting alot of different information about the wiring. I am looking for someone who has done this themself not posting other information. Really need GOOD advise about wiring the efi into the Zook. |
|
| Author: | atari4x4 [ Thu Feb 14, 2013 7:30 pm ] |
| Post subject: | Re: Gti into sierra wiring details |
this is probably the most comprehensive one around... http://www.auszookers.com/forum/viewtop ... on#p663556 then this one, but the pics are broke http://auszookers.com/index.php?option= ... &Itemid=62 |
|
| Author: | billygoat [ Thu Feb 14, 2013 11:40 pm ] |
| Post subject: | Re: Gti into sierra wiring details |
Thankyou but I already have this one, but I do think it is the best one getting around. |
|
| Author: | atari4x4 [ Thu Feb 14, 2013 11:50 pm ] |
| Post subject: | Re: Gti into sierra wiring details |
that pretty much spells it all out for you... if you're not confident about the wiring, get onto Killa Kustom Kables |
|
| Author: | jimbo_jones [ Sun Feb 17, 2013 8:26 am ] |
| Post subject: | Re: Gti into sierra wiring details |
viewtopic.php?f=5&t=24905&p=485897&hilit=gti+wiring#p485897 more wiring |
|
| Author: | billygoat [ Sun Feb 17, 2013 6:05 pm ] |
| Post subject: | Re: Gti into sierra wiring details |
Thanks mate I am getting so much different info, none of it matches & I am getting very confused about it all. Not to mention the dizzy drama's. |
|
| Author: | atari4x4 [ Sun Feb 17, 2013 6:10 pm ] |
| Post subject: | Re: Gti into sierra wiring details |
get onto Killa Kustom Kables |
|
| Author: | chris77 [ Mon Feb 18, 2013 4:16 am ] |
| Post subject: | Re: Gti into sierra wiring details |
I bit more info may help . None of it matches what ? I only have experience with mk1 gti's , they are a bit easier I guess . What model engine do you have ? Dissy should not be a drama , either cut the firewall or fit a right angle kit ( have heard they are not the best thou ) . I have had to machine one to fit and know of another that siezed up . Step back sit down and have a beer , then tell us the full story . Chris |
|
| Author: | jonno_racing [ Mon Feb 18, 2013 8:12 am ] |
| Post subject: | Re: Gti into sierra wiring details |
You should never cut a firewall, thats a stat write off.. the bought angle drives are a littke sketchy, there are still a bunch of mine running round aus. |
|
| Author: | billygoat [ Mon Feb 18, 2013 4:59 pm ] |
| Post subject: | Re: Gti into sierra wiring details |
I think it is a mk2. I cant afford the right angle conversion but have read about mazda one that fits from a 323 gtx. Only problem is I cant find one online. I am living in far North QLD & dont have to many options. I am doing the whole conversion myself exept for the exhaust. I think all will be ok just need to know more about the mazda dizzy cap. I am not grinding the cap down as Suzispares has told me to do & not cutting the firewall at all.Everone here has been very helpfull & I will put all pictures on here as soon as finished in about 2 weeks or so, give or take. Gremlins are sure to hamper the end finish time. |
|
| Author: | chris77 [ Tue Feb 19, 2013 4:20 am ] |
| Post subject: | Re: Gti into sierra wiring details |
I read about the dissy cap when we installed the first gti I wired , as I said it was a mk1 . Since it was a trailer queen a hole was bored into the firewall . The second used an angle kit , that did not fit . Mine is not in a 413 so no issue with the dissy . I have not seen the cap required in the hand but think this would be an aftermarket version of it . http://www.ebay.com.au/itm/Beck-Arnley- ... 0597581189 Do you have a wiring diagram that matches the engine you have , or are you still tring to sort the dissy for now ? Chris |
|
| Author: | jonno_racing [ Tue Feb 19, 2013 6:54 am ] |
| Post subject: | Re: Gti into sierra wiring details |
The cap wont fit a mk1 anyways! angle drives DONT work on mk2/3's |
|
| Author: | billygoat [ Tue Feb 19, 2013 8:04 am ] |
| Post subject: | Re: Gti into sierra wiring details |
I think I have sorted out the dizzy cap issue. Now for the efi fuel pump & hoses. I am told my sj80 tank is good to go with a Vitara efi pump just need to know about the fuel lines? Anyone have any experience with these? |
|
| Author: | jonno_racing [ Tue Feb 19, 2013 8:07 am ] |
| Post subject: | Re: Gti into sierra wiring details |
Heeps however its all pointed out in the posts linked above. |
|
| Author: | billygoat [ Wed Feb 20, 2013 8:04 pm ] |
| Post subject: | Re: Gti into sierra wiring details |
Ok ok so I have a MK3 engine does this change anything for me? Can I still use allt he infomation I have from above or do I need new information? |
|
| Author: | atari4x4 [ Wed Feb 20, 2013 8:18 pm ] |
| Post subject: | Re: Gti into sierra wiring details |
pretty sure it's all in that thread
|
|
| Author: | billygoat [ Tue Mar 05, 2013 4:14 pm ] |
| Post subject: | Re: Gti into sierra wiring details |
Has anyone got any good pics & really usefull advise about wiring looms? None of the links above are very helpfull for someone doing everything themself. Please help me. Please. |
|
| Author: | atari4x4 [ Tue Mar 05, 2013 4:25 pm ] |
| Post subject: | Re: Gti into sierra wiring details |
if i was you & you were me & i wasn't confident in doing the loom you'd tell me to get onto atari4x4 wrote: get onto Killa Kustom Kables
|
|
| Author: | billygoat [ Tue Mar 05, 2013 4:39 pm ] |
| Post subject: | Re: Gti into sierra wiring details |
I have it all hooked up to the engine just got a little scared with all the left over wiring but I have just got a good wiring diagram that might just fix it all. Thanks heaps mate. I might just do that after all anyway, but I do want to do it all myself. |
|
| Author: | billygoat [ Wed Mar 06, 2013 6:14 pm ] |
| Post subject: | Re: Gti into sierra wiring details |
My last coment here has confused me also. |
|
| Author: | billygoat [ Thu Mar 07, 2013 6:40 pm ] |
| Post subject: | Re: Gti into sierra wiring details |
Loom is on its way to Killa Kustom Kables. Thanks for putting me onto them everyone. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|