| auszookers.com https://auszookers.com/forum/ |
|
| vitara g16 8v carby into sierra https://auszookers.com/forum/viewtopic.php?f=5&t=3919 |
Page 1 of 1 |
| Author: | shep [ Mon Jan 26, 2009 11:50 am ] |
| Post subject: | vitara g16 8v carby into sierra |
i am picking up a vitara g16a today, what do i need to do to make it fit a 89 sierra. also the motor has a webber on it should i look for a vitara carby. |
|
| Author: | want33s [ Mon Jan 26, 2009 2:22 pm ] |
| Post subject: | Re: vitara g16 8v carby into sierra |
You'll need one of Ben t's adaptor kits (Ebay $200). They are also available from www.lowrangeoffroad.com. If you didn't get the starter with the G16 you can use the G13 one if you grind it to fit. Fit the G13 sump and mod the pickup tube. I would lose the Weber too. They use way too much fuel IMHO. Jas. |
|
| Author: | shep [ Tue Jan 27, 2009 1:19 pm ] |
| Post subject: | Re: vitara g16 8v carby into sierra |
thanks mate what needs to be done to the oil pick up tube? |
|
| Author: | shep [ Tue Jan 27, 2009 2:05 pm ] |
| Post subject: | Re: vitara g16 8v carby into sierra |
also what flywheel/clutch combo? i dont have a 1.6 starter. where would i find a vit carby. |
|
| Author: | ZukChiK [ Tue Jan 27, 2009 2:19 pm ] |
| Post subject: | Re: vitara g16 8v carby into sierra |
Wreckers would be a start! I bought my 1.6 carby for $120... |
|
| Author: | shep [ Tue Jan 27, 2009 2:23 pm ] |
| Post subject: | Re: vitara g16 8v carby into sierra |
if it is not a hilux or a landcruser it wont be in the wreckers around here and darwin is the same. it has taken me 12 months to find a motor. |
|
| Author: | ZukChiK [ Tue Jan 27, 2009 2:31 pm ] |
| Post subject: | Re: vitara g16 8v carby into sierra |
You could try our wreckers here in SA? They can usually freight anywhere in Australia. Here is there website if you want to contact them & see if they have one in stock: http://www.topspotauto.com.au |
|
| Author: | shep [ Tue Jan 27, 2009 3:29 pm ] |
| Post subject: | Re: vitara g16 8v carby into sierra |
thanks mate |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|