| auszookers.com https://auszookers.com/forum/ |
|
| Suzuki Stockman questions. https://auszookers.com/forum/viewtopic.php?f=5&t=39193 |
Page 1 of 1 |
| Author: | Critical Energy [ Sun Feb 24, 2013 1:31 pm ] |
| Post subject: | Suzuki Stockman questions. |
Hi all, I just bought an '85 Stockman ute, F10A engine I think, with alloy tray, just the thing i've been looking for. Few questions if I could: 1- The seats are shot, assuming they are hard to get hold of in decent condition, what other seats fit (I don't mind modifying them to fit)? 2- I want to service it (god knows when it was last done), what oil & quantities will I require for engine, gearbox, transfer case, diffs? 3- The brakes are terrible, are there any common problems relating to this or just a general going over required. 4- The front left swivel hub is weeping quite badly, how do I fix that? Or am I best looking at putting wide track diffs on it (thinking of that anyway) and doing it then? 5- Rust- On inspection there appears to be very little, are there any typical spots that rust will start that I should start looking? Sorry for all the questions, sure there will be many more over the coming years though! Rich |
|
| Author: | zooky08 [ Sun Feb 24, 2013 2:02 pm ] |
| Post subject: | Re: Suzuki Stockman questions. |
1. swift seats fit with the least modifications. 3. just check over them, may need adjusting or new wheel cylinder or shoes. 4. buy a swivel rebuild kit of your local part dealer or ebay. 5. sills, floor, flares, around the battery. around the body studs. many more places you can check. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|