| auszookers.com https://auszookers.com/forum/ |
|
| Model interchangeability With sierras https://auszookers.com/forum/viewtopic.php?f=5&t=39360 |
Page 1 of 1 |
| Author: | valitank [ Sun Mar 03, 2013 6:38 pm ] |
| Post subject: | Model interchangeability With sierras |
Just a few quick questions... Can you fit the later model Dash into the earlier one? As in the whole dash With the body's, are they all interchangeable with the chassis? And lastly what would the chances be of finding another lab cab? |
|
| Author: | Gwagensteve [ Sun Mar 03, 2013 6:44 pm ] |
| Post subject: | Re: Model interchangeability With sierras |
What's a "lab cab"? Do you mean "LWB cab" and if so, what model? 1.0/1.3 Trayback, 1.0/1.3 style side? 1.3 WT styleside? Maruti? When you say "later" and "earlier" You need to me more specific. If you swap everything you can swap a 1.3 NT dash into a 1.3 WT, likewise it's possible to swap a coil dash into a NT or WT if you have everything. It's not really feasible to swap any 1.3 dash into a 1.0 without swapping the firewall too, or large chunks of it, and swapping the whole wiring loom. Steve. |
|
| Author: | 303zuke [ Sun Mar 03, 2013 7:04 pm ] |
| Post subject: | Re: Model interchangeability With sierras |
valitank wrote: Just a few quick questions... With the body's, are they all interchangeable with the chassis? The Type 1 and 2 SJ40 bodies and chassies have different mounting points/locations to later models of Sierra (Type 3 SJ40/All 1.3/Maruti) |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|