when I do it I will take lots of pics step by step
I hope!!!!!!
| auszookers.com https://auszookers.com/forum/ |
|
| RUF https://auszookers.com/forum/viewtopic.php?f=5&t=3945 |
Page 1 of 1 |
| Author: | Geepee [ Fri Jan 30, 2009 12:32 am ] |
| Post subject: | RUF |
ok its time to start to do a RUF What I know, I think Please correct me if I am wrong I am getting a full set of 2" rear springs (4 of) cut off the rear spring mount off chasie and turn it around, weld back on? cut off the front shackle mount and weld back on app 35mm forward? Do I need a front tailshaft spacer after the RUF?? also doing front shock hoops Gaz |
|
| Author: | royce [ Fri Jan 30, 2009 12:37 am ] |
| Post subject: | Re: RUF |
if you are moving the diff forward youll need a spacer, otherwise you dont really need to mover the rear mount back and the front forward but I can see that working well, not too far forward and not massive shackles |
|
| Author: | Geepee [ Fri Jan 30, 2009 12:42 am ] |
| Post subject: | Re: RUF |
royce wrote: massive shackles
thanks just running std shackles doesnt the diff move forward when you do a ruf? |
|
| Author: | royce [ Fri Jan 30, 2009 12:56 am ] |
| Post subject: | Re: RUF |
if you leave the rear mount in the stock spot, if you move it back it wont, depending on how much longer that side of the spring is and haw far you move it |
|
| Author: | Geepee [ Fri Jan 30, 2009 1:06 am ] |
| Post subject: | Re: RUF |
thanks when the spring arrive, we will measure it all up |
|
| Author: | mcwilly [ Fri Jan 30, 2009 1:43 am ] |
| Post subject: | Re: RUF |
is there a thread that shows how to do a ruf? looking into this wen i do a spoa |
|
| Author: | Geepee [ Fri Jan 30, 2009 1:49 am ] |
| Post subject: | Re: RUF |
when I do it I will take lots of pics step by step I hope!!!!!!
|
|
| Author: | Bruce [ Fri Jan 30, 2009 3:21 am ] |
| Post subject: | Re: RUF |
Pop over mate and look at Caspers. |
|
| Author: | zooker [ Fri Jan 30, 2009 1:39 pm ] |
| Post subject: | Re: RUF |
Bruce wrote: Pop over mate and look at Caspers.
x2 its a setup thats proven to work. I plan on doing the same replacing the front spring hangers with the LJ hangers. |
|
| Author: | 2stroker [ Fri Jan 30, 2009 5:00 pm ] |
| Post subject: | Re: RUF |
We used to use LJ rear mounts on the front of our LJ when doing RUF in the mid 1980's, they are elongated and stick out off the back of the chassis where the front are not. Too hard to find LJ chassis to chop up these days so it's just as easy to make them up. Metal on the LJ ones is a bit thin anyway. These were made up for a RUF, NT to WT conversion. 
|
|
| Author: | Geepee [ Sat Jan 31, 2009 1:01 am ] |
| Post subject: | Re: RUF |
Thanks looks easy to make got your pm thanks for that |
|
| Author: | mcwilly [ Sat Jan 31, 2009 2:31 am ] |
| Post subject: | Re: RUF |
can you just do the rear springs up front and extended shackles and not move mounting points etc |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|