[billygoat]

I am starting a gti conversion into my Sierra in a few weeks & I am getting alot of different information about the wiring. I am looking for someone who has done this themself not posting other information. Really need GOOD advise about wiring the efi into the Zook.

[atari4x4]

this is probably the most comprehensive one around...

http://www.auszookers.com/forum/viewtop ... on#p663556

then this one, but the pics are broke

http://auszookers.com/index.php?option= ... &Itemid=62

[billygoat]

Thankyou but I already have this one, but I do think it is the best one getting around.

[atari4x4]

that pretty much spells it all out for you... if you're not confident about the wiring, get onto Killa Kustom Kables

[jimbo_jones]

viewtopic.php?f=5&t=24905&p=485897&hilit=gti+wiring#p485897

more wiring

[billygoat]

Thanks mate I am getting so much different info, none of it matches & I am getting very confused about it all. Not to mention the dizzy drama's.

[atari4x4]

get onto Killa Kustom Kables

[chris77]

I bit more info may help . None of it matches what ? I only have experience with mk1 gti's , they are a bit easier I guess . What model engine do you have ?
Dissy should not be a drama , either cut the firewall or fit a right angle kit ( have heard they are not the best thou ) . I have had to machine one to fit and know of another that siezed up .

Step back sit down and have a beer , then tell us the full story .

Chris

[jonno_racing]

You should never cut a firewall, thats a stat write off..
the bought angle drives are a littke sketchy, there are still a bunch of mine running round aus.

[billygoat]

I think it is a mk2. I cant afford the right angle conversion but have read about mazda one that fits from a 323 gtx. Only problem is I cant find one online. I am living in far North QLD & dont have to many options. I am doing the whole conversion myself exept for the exhaust. I think all will be ok just need to know more about the mazda dizzy cap. I am not grinding the cap down as Suzispares has told me to do & not cutting the firewall at all.Everone here has been very helpfull & I will put all pictures on here as soon as finished in about 2 weeks or so, give or take. Gremlins are sure to hamper the end finish time.

[chris77]

I read about the dissy cap when we installed the first gti I wired , as I said it was a mk1 . Since it was a trailer queen a hole was bored into the firewall . The second used an angle kit , that did not fit . Mine is not in a 413 so no issue with the dissy .

I have not seen the cap required in the hand but think this would be an aftermarket version of it .

http://www.ebay.com.au/itm/Beck-Arnley- ... 0597581189

Do you have a wiring diagram that matches the engine you have , or are you still tring to sort the dissy for now ?

Chris

[jonno_racing]

The cap wont fit a mk1 anyways!
angle drives DONT work on mk2/3's

[billygoat]

I think I have sorted out the dizzy cap issue. Now for the efi fuel pump & hoses. I am told my sj80 tank is good to go with a Vitara efi pump just need to know about the fuel lines? Anyone have any experience with these?

[jonno_racing]

Heeps however its all pointed out in the posts linked above.

[billygoat]

Ok ok so I have a MK3 engine does this change anything for me? Can I still use allt he infomation I have from above or do I need new information?

[atari4x4]

pretty sure it's all in that thread

[billygoat]

Has anyone got any good pics & really usefull advise about wiring looms? None of the links above are very helpfull for someone doing everything themself. Please help me. Please.

[atari4x4]

if i was you & you were me & i wasn't confident in doing the loom you'd tell me to get onto

atari4x4 wrote:

get onto Killa Kustom Kables

[billygoat]

I have it all hooked up to the engine just got a little scared with all the left over wiring but I have just got a good wiring diagram that might just fix it all. Thanks heaps mate. I might just do that after all anyway, but I do want to do it all myself.

[billygoat]

My last coment here has confused me also.

[billygoat]

Loom is on its way to Killa Kustom Kables. Thanks for putting me onto them everyone.