auszookers.com
https://auszookers.com/forum/

solid pinion spacers
https://auszookers.com/forum/viewtopic.php?f=5&t=395		 Page 1 of 1
Author:  royce [ Sat Sep 30, 2006 3:23 pm ]
Post subject:  solid pinion spacers
anybody know where to get a solid pinion spacer for a vit front diff? I think this is the reason the GV's blow crownwheels cause the crush spacer squashes under load.

or better still, Dimensions for a spacer so I can get one made up :)
Author:  Sneakyzook [ Sat Sep 30, 2006 7:10 pm ]
Post subject:  Re: solid pinion spacers
I dont know but I know the same thing happens to Holden Jackaroos as well. (and it costs a bucket to fix) :wink:

Are crush spacers fitted to all vehicles, Do sierras have these?? :?
Author:  joshNZ [ Sat Sep 30, 2006 7:40 pm ]
Post subject:  Re: solid pinion spacers
yeah all diffs have them,or something along the same line,sierras also have them
Author:  cj_zuki [ Thu Oct 05, 2006 3:18 am ]
Post subject:  Re: solid pinion spacers
Not all e.g. Patrols, but most these days due to cost. I got mine from Matt at Total Traction Drivelines in Melbourne and he fine tunes it to the right size for the individual diff.
Author:  joshNZ [ Thu Oct 05, 2006 3:59 am ]
Post subject:  Re: solid pinion spacers
what does a pootrol have
Author:  cj_zuki [ Thu Oct 05, 2006 4:14 pm ]
Post subject:  Re: solid pinion spacers
solid spacer
Author:  Damo [ Fri Dec 15, 2006 2:06 pm ]
Post subject:  Re: solid pinion spacers
Here is an interesting article on the subject. Granted it's aimed at Toyota stuff but AFAIK the zook gear is of a very similar design.

http://www.4x4wire.com/toyota/tech/crush_sleeve/

Royce, have you looked any further into this?
Author:  royce [ Fri Dec 15, 2006 2:27 pm ]
Post subject:  Re: solid pinion spacers
no I'll probably run around last minute when I finally find a steel diff under a gazillion dollars somewhere :oops:
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/