| auszookers.com https://auszookers.com/forum/ |
|
| 16x7's on a Sierra https://auszookers.com/forum/viewtopic.php?f=5&t=39574 |
Page 1 of 1 |
| Author: | shark [ Wed Mar 13, 2013 5:03 pm ] |
| Post subject: | 16x7's on a Sierra |
Hey guys pretty simple one. I have bought some 16" tyres to go on the NT sierra. The biggest offset I can get it - 13 Will that clear everything okay?? |
|
| Author: | SierraDan [ Wed Mar 13, 2013 5:05 pm ] |
| Post subject: | Re: 16x7's on a Sierra |
I have 15x7 -13. With 31x10.5 tyres. The tyres just nick the leaf spring in WT diff WT spring configuration. Your tyre choice will depend on what clears or not. |
|
| Author: | shark [ Wed Mar 13, 2013 5:20 pm ] |
| Post subject: | Re: 16x7's on a Sierra |
My tyre is a 30.5" x 9.5". Bighorns |
|
| Author: | SierraDan [ Wed Mar 13, 2013 5:23 pm ] |
| Post subject: | Re: 16x7's on a Sierra |
I would say yes It will be fine, steering wise. (Provided you have sufficient lift/tyre clearance.) As far as i know, the spring spacing and axle width went out by the same amount. |
|
| Author: | Ace [ Wed Mar 13, 2013 6:25 pm ] |
| Post subject: | Re: 16x7's on a Sierra |
30, 9.5, 16's? or is it a 235 etc 16? Sorry don't want to sound like a dick (again) but just checking its for a 16" rim / sounds expensive - the only 16's id be keen on wld be 235 85 My 30, 9.5 NT on factory rims (-5 I think) scrub on the body near full lock no lift - dont think lift wld fix this 
|
|
| Author: | shark [ Wed Mar 13, 2013 7:45 pm ] |
| Post subject: | Re: Sierra high top RESURRECTION *Perth Build* BALENO CONVER |
245/75R16 |
|
| Author: | shark [ Wed Mar 13, 2013 7:46 pm ] |
| Post subject: | Re: 16x7's on a Sierra |
Random size to try but the price was very good. I can get good quality king rims very cheap so that's not an issue. |
|
| Author: | Matthew [ Wed Mar 13, 2013 8:55 pm ] |
| Post subject: | Re: 16x7's on a Sierra |
I've been thinking about 245/75r16s for road tyres. 245/75r16s are nearly identical in od to the majority of 31s, just skinner. IMO a much better size for a Sierra than a 31x10.5, only downside is that the majority of them seem to be load range 'E'. |
|
| Author: | SierraDan [ Thu Mar 14, 2013 5:42 am ] |
| Post subject: | Re: 16x7's on a Sierra |
and 31x10.5x15 is a very common and very cheap size. Nothing wrong with them. |
|
| Author: | shark [ Thu Mar 14, 2013 7:33 am ] |
| Post subject: | Re: 16x7's on a Sierra |
I don't think there is anything wrong with that size. I just got a good deal on mine. I think i might otherwise for the - 13 16x7 |
|
| Author: | got_bar_work [ Fri Mar 15, 2013 8:07 am ] |
| Post subject: | Re: 16x7's on a Sierra |
Hope the kings u get are better then the crap steel 15x7 ones that i keep bending lips on |
|
| Author: | shark [ Fri Mar 15, 2013 8:22 am ] |
| Post subject: | Re: 16x7's on a Sierra |
What colour is the stripe?? Then I can tell you what brand it is. |
|
| Author: | got_bar_work [ Fri Mar 15, 2013 12:01 pm ] |
| Post subject: | Re: 16x7's on a Sierra |
Mine are 15x7 +10 kings and i have bent 3 lips now They realy need more meat on the lip like the rings fat zook weldes on |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|