| auszookers.com https://auszookers.com/forum/ |
|
| name this fitting https://auszookers.com/forum/viewtopic.php?f=5&t=39665 |
Page 1 of 1 |
| Author: | tanshi [ Mon Mar 18, 2013 10:37 am ] |
| Post subject: | name this fitting |
I'm having a bit of a google around trying to find parts for my powersteering hoses. in this pic the fitting is on a pajero powersteering pump. im not really wanting to get a whole pajero hose and try and fit that. can any one tell me what it might be called? 
|
|
| Author: | fordem [ Mon Mar 18, 2013 10:51 am ] |
| Post subject: | Re: name this fitting |
It's a banjo union. |
|
| Author: | tanshi [ Mon Mar 18, 2013 10:54 am ] |
| Post subject: | Re: name this fitting |
unfortunatly its not a normal one. the spigot the it sits on is bigger at the bottom than it is at the top. and a nut screws down on it rather than a bolt running through the middle. |
|
| Author: | Rossco [ Mon Mar 18, 2013 12:01 pm ] |
| Post subject: | Re: name this fitting |
take it to enzed and see what they say |
|
| Author: | mrw82 [ Mon Mar 18, 2013 2:43 pm ] |
| Post subject: | Re: name this fitting |
If you have that hose/fitting enzed will be able to cut the pipe off and braze a fitting or hosetail onto it. Otherwise you might be able to use a standard banjo and drill out one side to suit the larger spigot. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|