| auszookers.com https://auszookers.com/forum/ |
|
| Standard carby or weber/Holley https://auszookers.com/forum/viewtopic.php?f=5&t=39706 |
Page 1 of 1 |
| Author: | Davidmacca [ Tue Mar 19, 2013 10:42 pm ] |
| Post subject: | Standard carby or weber/Holley |
I want to either get a weber/Holley carby or tune the standard carby on vitara. Which will be the best way to go, which will be better for hills, better for power. Not worried about fuel just want to get a bit of power, and the motor will have slight head work. Thanks for any feedback |
|
| Author: | JrZook [ Tue Mar 19, 2013 10:45 pm ] |
| Post subject: | Re: Standard carby or weber/Holley |
Stock for hills Weber /Holley for power |
|
| Author: | Davidmacca [ Tue Mar 19, 2013 11:50 pm ] |
| Post subject: | Re: Standard carby or weber/Holley |
But could I get a standard one to go good or could I get a weber / Holley not to flood ? |
|
| Author: | JrZook [ Wed Mar 20, 2013 12:35 am ] |
| Post subject: | Re: Standard carby or weber/Holley |
Standard carb cannot be matched to the weber in flow, therefore it cannot outperform the weber in power. You can certainly improve the weber on angles by modifying the float bowl vents but due to the inherent design of it you will always get fueling issues on large angles. There should be a few weber threads on here already |
|
| Author: | Ace [ Wed Mar 20, 2013 1:21 pm ] |
| Post subject: | Re: Standard carby or weber/Holley |
Sidedarfts? - draughts? - you know what I mean. Then its only the manifold that's the problem or a 38/38 if gas / outlay isn't a worry. you can get some high comp pistions cheap enough if its the early 1300 |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|