| auszookers.com https://auszookers.com/forum/ |
|
| Powertrax 1510 lock-rite locker in 94 vitara yay or nay? https://auszookers.com/forum/viewtopic.php?f=5&t=39723 |
Page 1 of 1 |
| Author: | mikkiguns [ Wed Mar 20, 2013 5:51 pm ] |
| Post subject: | Powertrax 1510 lock-rite locker in 94 vitara yay or nay? |
Hi guys i have used the search tool & come to no conclusion, i own a 94 swb g16b vitara of wich i recently blew a fist sized hole in the front alloy housing, Ive since purchased a steel gv housing to swap over & i thought whilst im at it i'l fit a front locker ive looked at several forum threads wich say the 1510 lock-rite from a sierra will fit. In searching for the best deal i received an email from low range off road wich states that i need the 1512 or 1532 & rocky road outfitters advised me that a 4 pin carrier from a pre 90's vit is required to make the 1510 fit. ive also read that people are running 1510's in both the front & rear of their vits Has anyone on here successfully fitted the 1510's & if so what exactly is required. thanks in advance miki |
|
| Author: | Built4thrashing [ Wed Mar 20, 2013 6:12 pm ] |
| Post subject: | Re: Powertrax 1510 lock-rite locker in 94 vitara yay or nay? |
1510 will fit. The difference is it comes with the pins used in the sierra diff. You dont need these pins when installing in a Vit center. |
|
| Author: | mikkiguns [ Wed Mar 20, 2013 6:51 pm ] |
| Post subject: | Re: Powertrax 1510 lock-rite locker in 94 vitara yay or nay? |
Built4thrashing wrote: 1510 will fit. The difference is it comes with the pins used in the sierra diff. You dont need these pins when installing in a Vit center. Thanks mate just alot of conflicting advice would the rear be the same case? & would your recomend fitting both or just the front? |
|
| Author: | Built4thrashing [ Wed Mar 20, 2013 8:03 pm ] |
| Post subject: | Re: Powertrax 1510 lock-rite locker in 94 vitara yay or nay? |
I have a 1510 fitted in the Vit center i run in the front of GV and it works perfectly and i used to have a 1510 in the rear GV diff also.Rear Gv is same as 12bolt Vit. |
|
| Author: | Fatzook [ Wed Mar 20, 2013 11:52 pm ] |
| Post subject: | Re: Powertrax 1510 lock-rite locker in 94 vitara yay or nay? |
Built4thrashing wrote: I have a 1510 fitted in the Vit center i run in the front of GV and it works perfectly and i used to have a 1510 in the rear GV diff also.Rear Gv is same as 12bolt Vit. If a 1510 fits a 7.25" vitara front, how can it fit an 8" vitara/ GV rear? |
|
| Author: | christover1 [ Thu Mar 21, 2013 1:39 pm ] |
| Post subject: | Re: Powertrax 1510 lock-rite locker in 94 vitara yay or nay? |
Side gears and pins must me the same size/shape |
|
| Author: | tanshi [ Thu Mar 21, 2013 1:44 pm ] |
| Post subject: | Re: Powertrax 1510 lock-rite locker in 94 vitara yay or nay? |
carrier bearings are the same so could be |
|
| Author: | Built4thrashing [ Thu Mar 21, 2013 2:39 pm ] |
| Post subject: | Re: Powertrax 1510 lock-rite locker in 94 vitara yay or nay? |
Fatzook wrote: Built4thrashing wrote: I have a 1510 fitted in the Vit center i run in the front of GV and it works perfectly and i used to have a 1510 in the rear GV diff also.Rear Gv is same as 12bolt Vit. If a 1510 fits a 7.25" vitara front, how can it fit an 8" vitara/ GV rear? It just does.... I had at one stage a 1510 and a 1512 lockright on the work bence and they were identicle......except the 1510 came with replacement cross pins. Side gears are the same tooth count. Its only spline count thats different. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|