spline count of what? let me guess steering shaft
22 spline front diff & 12 bolt rear if your looking at lockers.
| auszookers.com https://auszookers.com/forum/ |
|
| vitara 94 model spline count https://auszookers.com/forum/viewtopic.php?f=5&t=39780 |
Page 1 of 1 |
| Author: | sj80tourer [ Fri Mar 22, 2013 10:20 pm ] |
| Post subject: | vitara 94 model spline count |
Does anyone know what the spline count on a 94 vitara is front and rear. |
|
| Author: | atari4x4 [ Fri Mar 22, 2013 10:25 pm ] |
| Post subject: | Re: vitara 94 model spline count |
spline count of what? let me guess steering shaft 22 spline front diff & 12 bolt rear if your looking at lockers. |
|
| Author: | sj80tourer [ Fri Mar 22, 2013 10:30 pm ] |
| Post subject: | Re: vitara 94 model spline count |
Can you get a front locker for them , also I'm after a gv steel housing are they the same spline |
|
| Author: | atari4x4 [ Fri Mar 22, 2013 10:39 pm ] |
| Post subject: | Re: vitara 94 model spline count |
yes you can get front lockers for them, the GV steel diff has a retarded diff centre that is vacuum operated instead of free wheeling hubs, you'll need to remove all the GV crap & fit a vitara 5.12 R&P as the ratio's are different. this is a perfect time to fit a locker, you can either stay with the 22 spline front end & get a locker to suit or upgrade to 26 spline (RHS CV & LHS axle + 26 locker) there is heaps of info on this swap floating around. viewtopic.php?f=1&t=17866&hilit=GV+steel+pinion+mount viewtopic.php?f=5&t=31632&hilit=GV+steel+pinion+mount viewtopic.php?f=5&t=16328&highlight=steel+diff viewtopic.php?f=5&t=17748&highlight=steel+diff viewtopic.php?f=5&t=15792&highlight=steel+diff viewtopic.php?f=5&t=15420&highlight=steel+diff viewtopic.php?f=5&t=13816&highlight=steel+diff viewtopic.php?f=5&t=13533&highlight=steel+diff happy reading 
|
|
| Author: | sj80tourer [ Wed Apr 10, 2013 4:33 pm ] |
| Post subject: | Re: vitara 94 model spline count |
Thanks mate i ended up purchasing a calmini anvil housing instead that should fix the front end issues |
|
| Author: | atari4x4 [ Wed Apr 10, 2013 4:54 pm ] |
| Post subject: | Re: vitara 94 model spline count |
you will still need the GV steel "3rd" member |
|
| Author: | sj80tourer [ Thu Oct 03, 2013 9:41 pm ] |
| Post subject: | Re: vitara 94 model spline count |
What gearing did you fit in your vit to run 31s . |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|