| auszookers.com https://auszookers.com/forum/ |
|
| Vit engine bay pics https://auszookers.com/forum/viewtopic.php?f=5&t=39782 |
Page 1 of 1 |
| Author: | burls [ Sat Mar 23, 2013 7:48 am ] |
| Post subject: | Vit engine bay pics |
I've searched as many builds as I had hot brekkies this year and have failed. Can one of you good 94 Vit lwb owners be able to take some happy snaps around the engine bay especially the wiring. |
|
| Author: | suzukiboy [ Sat Mar 23, 2013 8:35 am ] |
| Post subject: | Re: Vit engine bay pics |
|
|
|
| Author: | DarkHorse [ Sat Mar 23, 2013 5:59 pm ] |
| Post subject: | Re: Vit engine bay pics |
Bit more info may be useful - what specifically do you want a look at? I've got a few photos of my 93 G16B, but hard to know what to look for... |
|
| Author: | burls [ Sat Mar 23, 2013 7:11 pm ] |
| Post subject: | Re: Vit engine bay pics |
I'm fitting the 16b into my LJ and was trying work out the best way to run the looms in the engine bay. The manual I have is for the later model so not much use to me. Any up close photos will be helpful. Darkhorse just had a look through your thread, the white vit looks the same as the gear I have, so anything you have on it would be great |
|
| Author: | tonyevans [ Sun Mar 24, 2013 12:52 pm ] |
| Post subject: | Re: Vit engine bay pics |
I have a 1993 Vitara out the back with the motor pulled so could take some pics there if that would help? |
|
| Author: | DarkHorse [ Sun Mar 24, 2013 1:22 pm ] |
| Post subject: | Re: Vit engine bay pics |
Pretty much every photo I took ended up in the thread, so wouldn't be much else I can offer I'm afraid. Hope it helps some. From memory when pulling it out there were two main looms that went through the firewall, one each side. The bulk of the engine stuff (Injectors etc) and the main fuse box went through the driver's side and straight to the ECU, then the other side ran along behind the dash, through the passenger side firewall and had wires to dizzy, AC (although this was retro-fitted so may not be same as factory) O2 sensor, air intake etc. If you still have the body/accessory stuff with it and can find the wiper pumps that'd be driver's side! Then again the architecture in the LJ might be so different as to make it all redundant anyway! |
|
| Author: | burls [ Sun Mar 24, 2013 6:30 pm ] |
| Post subject: | Re: Vit engine bay pics |
Thanks for the info I've got what I can from your thread Yes Tony any photos would be welcome |
|
| Author: | tonyevans [ Mon Mar 25, 2013 11:04 am ] |
| Post subject: | Re: Vit engine bay pics |
Here you go - Hope they help.    
|
|
| Author: | tonyevans [ Mon Mar 25, 2013 11:06 am ] |
| Post subject: | Re: Vit engine bay pics |
And   
|
|
| Author: | larry [ Tue Mar 26, 2013 7:08 pm ] |
| Post subject: | Re: Vit engine bay pics |
from a 98' 
|
|
| Author: | burls [ Tue Mar 26, 2013 7:31 pm ] |
| Post subject: | Re: Vit engine bay pics |
I think mine is a 93 thanks anyway |
|
| Author: | tonyevans [ Wed Mar 27, 2013 7:14 am ] |
| Post subject: | Re: Vit engine bay pics |
The ones I posted are a 1993 model LWB |
|
| Author: | DarkHorse [ Wed Mar 27, 2013 10:32 am ] |
| Post subject: | Re: Vit engine bay pics |
Motor's the same, body's the same - but the battery and main fuse box has swapped sides with the rad overflow bottle. Take whichever suits your purposes I guess. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|