| auszookers.com https://auszookers.com/forum/ |
|
| Jimny ProblemWHAT DO I DO!!!!!!!!! https://auszookers.com/forum/viewtopic.php?f=5&t=39796 |
Page 1 of 1 |
| Author: | MikeyS [ Sat Mar 23, 2013 11:28 pm ] |
| Post subject: | Jimny ProblemWHAT DO I DO!!!!!!!!! |
Hi guys/girls i have recently broke my transfer case mount which has caused my rear tail shaft and the transfer case to sit on a nasty angle. the mount is fixed now but the joint between the transfer case and the tail shaft is spitting all the grease out !!!!  WHAT DO I DO TO STOP IT SPITTING THE GREASE OUT??
|
|
| Author: | sideways [ Sat Mar 23, 2013 11:40 pm ] |
| Post subject: | Re: Jimny ProblemWHAT DO I DO!!!!!!!!! |
Replace the CV boot. Common problem. |
|
| Author: | MikeyS [ Sat Mar 23, 2013 11:43 pm ] |
| Post subject: | Re: Jimny ProblemWHAT DO I DO!!!!!!!!! |
 Picture
|
|
| Author: | MikeyS [ Sat Mar 23, 2013 11:43 pm ] |
| Post subject: | Re: Jimny ProblemWHAT DO I DO!!!!!!!!! |
Where do you get a CV BOOT from ???? |
|
| Author: | Scales [ Sun Mar 24, 2013 4:32 am ] |
| Post subject: | Re: Jimny ProblemWHAT DO I DO!!!!!!!!! |
CV BOOTS are available AT SUZUKI !!!!!!! or try a CV SPECIALIST. 
|
|
| Author: | BAZZOOK [ Sun Mar 24, 2013 5:27 am ] |
| Post subject: | Re: Jimny ProblemWHAT DO I DO!!!!!!!!! |
It's not a CV boot. the rubber is inside and is bonded to the the metal. You can buy a whole new tailshaft for about $600.00, or second hand $200.00. Once the bond breaks sand etc. gets in and the CV shits its self. The wrecker I bought mine off says you can put a boot over the top but I can't see how. http://www.suzistore.com.au/onlinestore ... 31-30.html SHAFT TAIL INTER MANUAL<br />Item code: 27101-81A21G SHAFT TAIL INTER MANUAL $475.00 SHAFT TAIL INTER MANUAL Item code: 27101-81A21G Product details Sort by Product Name +/- Manufacturer: Select manufacturer Results 31 - 37 of 37 > |
|
| Author: | MikeyS [ Sun Mar 24, 2013 6:31 am ] |
| Post subject: | Re: Jimny ProblemWHAT DO I DO!!!!!!!!! |
are you sure that is the right shaft??because in the picture its not the right one 
|
|
| Author: | 303zuke [ Sun Mar 24, 2013 9:21 am ] |
| Post subject: | Re: Jimny ProblemWHAT DO I DO!!!!!!!!! |
sideways wrote: Replace the CV boot. Common problem. It is a common problem on the Jimny, and yet another reason why the Sierra Transfer swap is a popular option because it eliminates that shat altogether (beside the gearing advantages it provides). Kits from companies such as Offroad Armory in the UK will set you back about $300 delivered. Add a second hand WT Sierra transfer for something like $100, and a front WT Sierra driveshaft to use in the rear of the Jimny for say $50 and you're well ahead of a $600 new driveshaft, with the added bonus of a 6% reduction in High Range for slightly bigger tyres. Down the track, you have the flexibility of buying even lower reduction gearsets for full-blown awesomeness! |
|
| Author: | zukenutter [ Mon Mar 25, 2013 7:12 pm ] |
| Post subject: | Re: Jimny ProblemWHAT DO I DO!!!!!!!!! |
BAZZOOK wrote: http://www.suzistore.com.au/onlinestore/four-wheel-drives/jimny-sn413-g13bb/transmission1744256939/results,31-30.html MikeyS wrote: are you sure that is the right shaft??because in the picture its not the right one Because it's the INTERmediate shaft, goes between the gearbox and transfer. 
|
|
| Author: | Scales [ Mon Mar 25, 2013 7:21 pm ] |
| Post subject: | Re: Jimny ProblemWHAT DO I DO!!!!!!!!! |
I had no idea these things were bonded on the shaft. I shouldve pay more attention when I did my WT mod. Surely though you would be able to source a generic boot from somewhere and band-it-clamp it on? |
|
| Author: | zukenutter [ Mon Mar 25, 2013 7:45 pm ] |
| Post subject: | Re: Jimny ProblemWHAT DO I DO!!!!!!!!! |
Two zip ties and an old bike tube
|
|
| Author: | zukenutter [ Mon Mar 25, 2013 7:46 pm ] |
| Post subject: | Re: Jimny ProblemWHAT DO I DO!!!!!!!!! |
I have a Jimny shaft with intact joint $150 in Brisbane |
|
| Author: | Scales [ Mon Mar 25, 2013 7:59 pm ] |
| Post subject: | Re: Jimny ProblemWHAT DO I DO!!!!!!!!! |
zukenutter wrote: Two zip ties and an old bike tube essentially, yes... but band-it's are stainless steel zip ties. |
|
| Author: | zukenutter [ Mon Mar 25, 2013 8:34 pm ] |
| Post subject: | Re: Jimny ProblemWHAT DO I DO!!!!!!!!! |
Do I remember an aftermarket product for sale on eBay a while ago? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|