auszookers.com
https://auszookers.com/forum/

sierra clutch kit
https://auszookers.com/forum/viewtopic.php?f=5&t=39931		 Page 1 of 1
Author:  kuta [ Sat Mar 30, 2013 3:58 pm ]
Post subject:  sierra clutch kit
hey all i have a sj70 sierra and need a clutch kit. looking on ebay and all the kits for a sj70 are 190 x 18T x 19.3
but i need 190mm X 20T X 22.75mm so do just get a kit for a sj80?? is the sj413 clutch the same as the sj80
thanks
Author:  jono165 [ Sat Mar 30, 2013 10:08 pm ]
Post subject:  Re: sierra clutch kit
Yep. 20 spline clutch goes with the stepped flywheel. I'm pretty sure most catalogue list the sj413 as the same as sj80.

Clutch industries link to the correct one. http://catalogue.clutchindustries.com.a ... 9639/R330N

I bought an exedy for mine from the states because it was a bargain and I was happy to wait, came with everything too, I don't think you get the antiseize grease for the splines, aligned tools or the pilot bearing with the clutch industries ones.
Author:  kuta [ Sun Mar 31, 2013 6:45 am ]
Post subject:  Re: sierra clutch kit
Awesome thanks heaps i can stop stressing im going to order the wrong one now. yar was thinking it is the r330n i need. but when i put my car into the Clutch industries catalogue it was telling me i need the r335n its a 18 spline one tho so thought i would ask. might have a look at the exedy. thanks again
Author:  kuta [ Sun Mar 31, 2013 8:56 am ]
Post subject:  Re: sierra clutch kit
now the person on ebay is saying that the r330 will not fit!!! and that i need the r335 even know i toled them i need 20teeth???
Author:  jono165 [ Sun Mar 31, 2013 9:01 am ]
Post subject:  Re: sierra clutch kit
Just go with what came out of the car. It's a mystery bag as to what an sj70 has some have the 18 spline other the 20 spline. If you have 20 splines the r335 is definitely the wrong one. Parts catalogues are not always correct.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/