| auszookers.com https://auszookers.com/forum/ |
|
| Jimny tyres https://auszookers.com/forum/viewtopic.php?f=5&t=40042 |
Page 1 of 1 |
| Author: | andrew96 [ Thu Apr 04, 2013 5:36 pm ] |
| Post subject: | Jimny tyres |
Hey guys, does anyone have a photo of a jimny with 2" or 3" lift and 235/75/15's or 29"s? Cheers. |
|
| Author: | jimny_timmy [ Thu Apr 04, 2013 5:54 pm ] |
| Post subject: | Re: Jimny tyres |
235's are 29's |
|
| Author: | andrew96 [ Thu Apr 04, 2013 6:12 pm ] |
| Post subject: | Re: Jimny tyres |
Like in 225/80, if there's a difference haha, |
|
| Author: | andrew96 [ Thu Apr 04, 2013 6:13 pm ] |
| Post subject: | Re: Jimny tyres |
Like in 225/80, 235/70 etc.. if there's a difference haha, |
|
| Author: | BertZook [ Thu Apr 04, 2013 6:18 pm ] |
| Post subject: | Re: Jimny tyres |
check the build treads, most of the jimnys here have 235's and 3".. if not 215's and 2"... only few ones run 30's and over |
|
| Author: | PORL [ Thu Apr 04, 2013 6:19 pm ] |
| Post subject: | Re: Jimny tyres |
235/75/r15 are fine with a 2 inch lift. I have no scrubbing with standard rims. |
|
| Author: | andrew96 [ Thu Apr 04, 2013 6:21 pm ] |
| Post subject: | Re: Jimny tyres |
Is 2" of 3" better? There's a $400 difference between them.. |
|
| Author: | atari4x4 [ Thu Apr 04, 2013 6:22 pm ] |
| Post subject: | Re: Jimny tyres |
andrew96 wrote: Like in 225/80, 235/70 etc.. if there's a difference haha, use this http://www.onlineconversion.com/tire_si ... ersion.htm |
|
| Author: | andrew96 [ Thu Apr 04, 2013 7:39 pm ] |
| Post subject: | Re: Jimny tyres |
What is needed for a 3inch lift kit that 2inch doesn't need? |
|
| Author: | Travis [ Thu Apr 04, 2013 7:46 pm ] |
| Post subject: | Re: Jimny tyres |
2" lift and 235s
|
|
| Author: | alien [ Thu Apr 04, 2013 7:48 pm ] |
| Post subject: | Re: Jimny tyres |
see if you can dig up monley's jimny build... he went from stock to 235's and changed his suspension like a thousand times before going to 31's and changing it some more before he inevitably flipped it on its lid. lol |
|
| Author: | jimny_timmy [ Thu Apr 04, 2013 8:21 pm ] |
| Post subject: | Re: Jimny tyres |
andrew96 wrote: What is needed for a 3inch lift kit that 2inch doesn't need? Extended brake lines and castor correction. Castor correction isn't exactly needed for the 2" but its highly recommended |
|
| Author: | suzkboy [ Thu Apr 04, 2013 8:34 pm ] |
| Post subject: | Re: Jimny tyres |
Here is my car 235s tuffdog 75mm lift and carstor corrected arms |
|
| Author: | PORL [ Thu Apr 04, 2013 9:51 pm ] |
| Post subject: | Re: Jimny tyres |
jimny_timmy wrote: andrew96 wrote: What is needed for a 3inch lift kit that 2inch doesn't need? Extended brake lines and castor correction. Castor correction isn't exactly needed for the 2" but its highly recommended VERY HIGHLY |
|
| Author: | andrew96 [ Thu Apr 04, 2013 9:55 pm ] |
| Post subject: | Re: Jimny tyres |
What does castor correction do? |
|
| Author: | PORL [ Thu Apr 04, 2013 9:57 pm ] |
| Post subject: | Re: Jimny tyres |
Helps you avoid swerving across the road when a light breeze grazes the Side of your Jimny. Makes the car feel more attached to the road after the lift |
|
| Author: | andrew96 [ Thu Apr 04, 2013 10:03 pm ] |
| Post subject: | Re: Jimny tyres |
Ahh okay cheers. |
|
| Author: | atari4x4 [ Thu Apr 04, 2013 10:14 pm ] |
| Post subject: | Re: Jimny tyres |
should help reduce the wobbles too. |
|
| Author: | andrew96 [ Wed Apr 24, 2013 11:28 pm ] |
| Post subject: | Re: Jimny tyres |
Attachment: image.jpg Does anyone on here own this jimny? It has 31" mtz and the guards don't looked to be chopped, it only looks like a 4inch lift.. |
|
| Author: | jimny_timmy [ Thu Apr 25, 2013 7:15 am ] |
| Post subject: | Re: Jimny tyres |
Can't say I've seen it before, but I'm guessing part of that lift is a body lift.... 31's don't just fit to a jimny that easily |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|