auszookers.com
https://auszookers.com/forum/

Swapping G16B from different model into Vitara
https://auszookers.com/forum/viewtopic.php?f=5&t=40259		 Page 1 of 1
Author:  jimbo_jones [ Sun Apr 14, 2013 8:26 am ]
Post subject:  Swapping G16B from different model into Vitara
My mates G16B in his Vitara has the std crack in the block above the starter motor he also has a G16B single point inj motor out of a swift sedan in his shed.
What we want to know is can we swap all the manifolds cam dizzy and sump over to run the swift motor in his vit?
Also do the swift G16B's suffer from cracked blocks or is it just the Vitara's?

Cheers
Author:  want33s [ Sun Apr 14, 2013 9:04 am ]
Post subject:  Re: Swapping G16B from different model into Vitara
If the Swift 16B is a 16V then everything will swap.

AFAIK there are no differences in any of the 16B blocks that say one will crack and one won't.
Author:  jimbo_jones [ Sun Apr 14, 2013 11:31 am ]
Post subject:  Re: Swapping G16B from different model into Vitara
Are the heads the same will all the Vitara bits fit the swift?
Author:  christover1 [ Sun Apr 14, 2013 4:46 pm ]
Post subject:  Re: Swapping G16B from different model into Vitara
My import engine was a G16A from a Swift 4wd, but was efi 16V.
Everything swapped over ok.
I used Vitara cam, dizzy, sump, oil pick up, and bearing cradle.
And all the external bolt on bits.
Author:  jimbo_jones [ Mon Apr 15, 2013 11:38 am ]
Post subject:  Re: Swapping G16B from different model into Vitara
cheers so should work ok then Armsup
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/