| auszookers.com https://auszookers.com/forum/ |
|
| electrical pins and sockets https://auszookers.com/forum/viewtopic.php?f=5&t=40312 |
Page 1 of 1 |
| Author: | burls [ Tue Apr 16, 2013 11:20 am ] |
| Post subject: | electrical pins and sockets |
Does anyone know where you can get the wiring pins and sockets for vitara wiring looms |
|
| Author: | burls [ Thu Apr 18, 2013 7:42 pm ] |
| Post subject: | Re: electrical pins and sockets |
anybody? |
|
| Author: | Highway-Star [ Thu Apr 18, 2013 8:12 pm ] |
| Post subject: | Re: electrical pins and sockets |
Exact Vitara ones, no. You can buy connector kits etc. This one can be bought online or at Repco: http://www.ebay.com.au/itm/NARVA-56250- ... 417222120a Some plugs may be similar to Vitara ones. Not sure where to get the correct electrical crimps for putting them together though... |
|
| Author: | burls [ Thu Apr 18, 2013 8:42 pm ] |
| Post subject: | Re: electrical pins and sockets |
I'm really after the vit ones |
|
| Author: | TheOtherLeft [ Sat Apr 20, 2013 10:28 am ] |
| Post subject: | Re: electrical pins and sockets |
Highway-Star wrote: Exact Vitara ones, no. You can buy connector kits etc. This one can be bought online or at Repco: http://www.ebay.com.au/itm/NARVA-56250- ... 417222120a Some plugs may be similar to Vitara ones. Not sure where to get the correct electrical crimps for putting them together though... Jaycar sell similar ones to those. |
|
| Author: | Rossco [ Mon Apr 22, 2013 12:17 am ] |
| Post subject: | Re: electrical pins and sockets |
What about another vit wiring loom? |
|
| Author: | burls [ Mon Apr 22, 2013 11:49 am ] |
| Post subject: | Re: electrical pins and sockets |
Im after new pins so as I can shorten and modify the existing looms. The pins and sockets have to be the same so as they fit in the vit loom plugs |
|
| Author: | 3cyl [ Mon Apr 22, 2013 2:42 pm ] |
| Post subject: | Re: electrical pins and sockets |
If you have no luck at an auto electrician, I guess you could use existing vitara plugs and join a cable to the tails with solder and heatshrink. Won't give you any trouble supported in the loom and stagger the splices so you don't get a big blob. |
|
| Author: | burls [ Mon Apr 22, 2013 4:18 pm ] |
| Post subject: | Re: electrical pins and sockets |
Yeah that was option "B" |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|