thx for the help guys. got it sorted now
| auszookers.com https://auszookers.com/forum/ |
|
| 2nd Fuel Filter install https://auszookers.com/forum/viewtopic.php?f=5&t=40421 |
Page 1 of 1 |
| Author: | TonkaZuk [ Sun Apr 21, 2013 6:07 am ] |
| Post subject: | 2nd Fuel Filter install |
hey guys.. just wondering what type of fuel filter is needed to fit the little 4.5mm line from the fuel pump to carby? and do i need to run more hose to keep it away from heat? |
|
| Author: | Rusho [ Sun Apr 21, 2013 8:20 am ] |
| Post subject: | Re: 2nd Fuel Filter install |
The cheap little inline ones from supercrap do the job |
|
| Author: | christover1 [ Sun Apr 21, 2013 8:24 am ] |
| Post subject: | Re: 2nd Fuel Filter install |
You don't want it touching anything hot, but ok in a warm area. I used a cable tie to keep mine away from the inlet manifold. Make sure you replace smaller ones more often. |
|
| Author: | TonkaZuk [ Sun Apr 21, 2013 9:07 am ] |
| Post subject: | Re: 2nd Fuel Filter install |
And is it a 6mm one needed? |
|
| Author: | Rusho [ Sun Apr 21, 2013 9:33 am ] |
| Post subject: | Re: 2nd Fuel Filter install |
The inline filters usually have 2 different sized barbs to allow various fitting applications |
|
| Author: | TonkaZuk [ Sun Apr 21, 2013 12:48 pm ] |
| Post subject: | Re: 2nd Fuel Filter install |
thx for the help guys. got it sorted now
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|