auszookers.com
https://auszookers.com/forum/

Removal of handbrake drum
https://auszookers.com/forum/viewtopic.php?f=5&t=40424		 Page 1 of 1
Author:  Macca52 [ Sun Apr 21, 2013 9:37 am ]
Post subject:  Removal of handbrake drum
I have cooked my handbrake. Transfer case mounted unit.. Have removed tailshaft. Is the drum just located on the studs like most rear drums or do I need to remove the centre nut and dismantle whole unit. My manual only shows rear wheel handbrake.
Author:  Scrawny [ Sun Apr 21, 2013 9:42 am ]
Post subject:  Re: Removal of handbrake drum
Yes, drum should be loose. Give it a tap with a hammer
Author:  Blkfxx [ Sun Apr 21, 2013 11:46 am ]
Post subject:  Re: Removal of handbrake drum
Image
Author:  shep [ Sun Apr 21, 2013 12:51 pm ]
Post subject:  Re: Removal of handbrake drum
Both the handbrake drum setups I have are different to that. On mine the drum locates on the transfer output spline and the tail shaft bolts straight to the drum ie no flange.
Author:  Scrawny [ Sun Apr 21, 2013 12:54 pm ]
Post subject:  Re: Removal of handbrake drum
shep wrote:
Both the handbrake drum setups I have are different to that. On mine the drum locates on the transfer output spline and the tail shaft bolts straight to the drum ie no flange.


So you've got to undo the centre nut then?
Author:  shep [ Sun Apr 21, 2013 12:56 pm ]
Post subject:  Re: Removal of handbrake drum
Yep. Remove tail shaft then centre nut and a bit of wd40 on the spline and the drum should slide off.
Author:  sideways [ Sun Apr 21, 2013 1:02 pm ]
Post subject:  Re: Removal of handbrake drum
Mine is like Sheps too.
Author:  Macca52 [ Sun Apr 21, 2013 1:41 pm ]
Post subject:  Re: Removal of handbrake drum
thanks for the responses.
Shep is on the money, his description fits mine. does anybody have a second hand drum and shoes for sale, mine is toast
Once again thanksfor the help.
Macca
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/