| auszookers.com https://auszookers.com/forum/ |
|
| G16b over running https://auszookers.com/forum/viewtopic.php?f=5&t=40552 |
Page 1 of 1 |
| Author: | pickles09 [ Fri Apr 26, 2013 5:41 pm ] |
| Post subject: | G16b over running |
I brought a Suzuki 1995 leafy a while back with a vitara g16b conversion in it and I was told that it had a 1.3l head fOr more compression and it had been rebuilt I have had an over running problem with it ever since I got it it overruns when I turn off the car and sometimes running backwards for a second this worries me I tried different carbys spark plug leads distributor cap and I've played with the timing a heap still does it but only when the engine is hot . The plug that plugs into the carby is that a fuel shut off solinoid ?? What does it do . Need help thanks mick ow and I did a compression test and it shows about 200 psi per piston |
|
| Author: | Goldnomad [ Sat Apr 27, 2013 7:02 am ] |
| Post subject: | Re: G16b over running |
It may be as simple as a carbon buildup in the head |
|
| Author: | Scrawny [ Sat Apr 27, 2013 7:07 am ] |
| Post subject: | Re: G16b over running |
Yes, part of that plug is for fuel shut off. Is it not plugged in? I'd be sorting that out before going any further |
|
| Author: | joeblow [ Sat Apr 27, 2013 1:12 pm ] |
| Post subject: | Re: G16b over running |
The fuel cut off solenoid MUST be plugged in. |
|
| Author: | pickles09 [ Sat Apr 27, 2013 6:58 pm ] |
| Post subject: | Re: G16b over running |
Us there any way to check if the solenoid is not working ? |
|
| Author: | coily96 [ Sat Apr 27, 2013 10:09 pm ] |
| Post subject: | Re: G16b over running |
It should click when you turn key to ignition. |
|
| Author: | pickles09 [ Sun Apr 28, 2013 7:57 pm ] |
| Post subject: | Re: G16b over running |
Whoever has done the conversion I think they have completely disconnected the solenoid because it works when I pull it off And test it but doesn't work with the car ignition might have to do a few other things but of trial and error I supose I adjusted the valves today and that didn't help |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|