| auszookers.com https://auszookers.com/forum/ |
|
| removing jimny gearbox https://auszookers.com/forum/viewtopic.php?f=5&t=40566 |
Page 1 of 1 |
| Author: | zooky08 [ Sat Apr 27, 2013 2:11 pm ] |
| Post subject: | removing jimny gearbox |
Ive tried searching but cant find any info how to remove a jimny gearbox. Ive got every thing undone, but i cant seem to get the box far enough back past the cross member to Alow the bellhousing to clear the clutch. Does any one know the best way to remove a non vvt jimny gearbox . |
|
| Author: | 31zook [ Sat Apr 27, 2013 3:16 pm ] |
| Post subject: | Re: removing jimny gearbox |
Normally the pull back and twist over eitherway... Not sure that will work for you, but you might have to rock the engine forwards and backwards to get it also. |
|
| Author: | PORL [ Sat Apr 27, 2013 5:35 pm ] |
| Post subject: | Re: removing jimny gearbox |
Unbolt engine mounts and lower the motor. It's a bitch |
|
| Author: | Scales [ Sat Apr 27, 2013 5:54 pm ] |
| Post subject: | Re: removing jimny gearbox |
yeah i've heard some people need to pull the engine forward a touch with straps or something too! Let us know how you get on, I may need to do my nonvvt soon too! maybe this will help http://www.bigjimny.com/images/document ... Clutch.pdf remember if you have enough access to the breather on the gearbox, chuck a hose on it! this will probably be the only chance you get to put a decent breather on there. |
|
| Author: | BAZZOOK [ Sun Apr 28, 2013 5:23 am ] |
| Post subject: | Re: removing jimny gearbox |
push the gearbox to the rear and remove the clutch. gearbox will then just drop out. refitting is the reverse. I used a mirror and torch to align the splines with the spigot bearing |
|
| Author: | zooky08 [ Sun Apr 28, 2013 8:46 am ] |
| Post subject: | Re: removing jimny gearbox |
Thanks guys, ended up undoing engine mounts and lifting engine. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|