| auszookers.com https://auszookers.com/forum/ |
|
| Longer pitman arm https://auszookers.com/forum/viewtopic.php?f=5&t=40607 |
Page 1 of 1 |
| Author: | screwloose [ Mon Apr 29, 2013 7:16 pm ] |
| Post subject: | Longer pitman arm |
Hi guys I need to fit a longer pitman arm to my vitara steering box (fitted in my Sierra). What type can I use? I remember something about Toyota tarago is that right? Cheers Rob |
|
| Author: | christover1 [ Mon Apr 29, 2013 7:25 pm ] |
| Post subject: | Re: Longer pitman arm |
I think Lowrange sell them. I was told Tarrago also, but never tried it. I had no probs using the Vit pitman arm on my Sierra. |
|
| Author: | Gwagensteve [ Tue Apr 30, 2013 11:25 am ] |
| Post subject: | Re: Longer pitman arm |
Lowrange used to sell a dropped pitman arm suitable for a vitara steering box in a sierra. It was about a 60mm drop from memory and was approximately 17mm longer than a standard vitara pitman arm. I think it is now discontinued/unavailable. It was a bit of a double edged sword though - with moderate lift height it really put the drag link too low and the extra length puts the tie rod and drag link very close together. Do you have more info on your setup? I have no problems getting full lock with a vitara pitman arm and sierra axles. Steve. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|