| auszookers.com https://auszookers.com/forum/ |
|
| 2002 XL7 Bash Plates https://auszookers.com/forum/viewtopic.php?f=5&t=41017 |
Page 1 of 1 |
| Author: | magnat [ Tue May 21, 2013 8:10 am ] |
| Post subject: | 2002 XL7 Bash Plates |
I am seeking out some Bash plates for the XL-7. Went out on the weekend into some pretty rutty country , Was straddling over the top of some 2 foot deep ruts and she lost traction and just slipped in and bellied out.. No damage but it got me thinking... that transfer case and diff are pretty exposed and any form of protection is better then none.... So the hunt is on for some underneath protection for the XL-7.. I have already spent some time underneath re-applying the underbody coat.. Thanks to super cheap ! |
|
| Author: | Built4thrashing [ Tue May 21, 2013 3:44 pm ] |
| Post subject: | Re: 2002 XL7 Bash Plates |
I made my own skid plates for the transfer. Not sure if it will fit the XL7 but the design will be very similar. Other than that GV skid plates should fit as they are the same chasis up till the gearbox crossmember. |
|
| Author: | magnat [ Tue May 21, 2013 5:09 pm ] |
| Post subject: | Re: 2002 XL7 Bash Plates |
A Company called Giz 4x4 have skid plates.. might check them out... (Just googled searched them and it came up ) |
|
| Author: | Built4thrashing [ Tue May 21, 2013 6:46 pm ] |
| Post subject: | Re: 2002 XL7 Bash Plates |
Ive bought from them in the past. Parts are cheaper than here and the service is quite good. The Snorkel is the same as ODA sells. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|