| auszookers.com https://auszookers.com/forum/ |
|
| no power to coil pack https://auszookers.com/forum/viewtopic.php?f=5&t=41090 |
Page 1 of 1 |
| Author: | Zuk_89 [ Sun May 26, 2013 9:16 am ] |
| Post subject: | no power to coil pack |
I got a 89 vitara and got no power to the coil pack ? Anyone know |
|
| Author: | royce [ Sun May 26, 2013 9:31 am ] |
| Post subject: | Re: no power to coil pack |
check the fuse? |
|
| Author: | Zuk_89 [ Sun May 26, 2013 9:44 am ] |
| Post subject: | Re: no power to coil pack |
Done all that not fusses |
|
| Author: | DAB [ Sun May 26, 2013 8:50 pm ] |
| Post subject: | Re: no power to coil pack |
crank sensor dude, the crank sensor tells your coil pack when to fire mate, hope that sorts it out for you, (be nice if someone can help me with my lift kit,lol) |
|
| Author: | royce [ Mon May 27, 2013 6:35 am ] |
| Post subject: | Re: no power to coil pack |
well there aint much else between the key and the coil, assuming you checked there was power there and didnt just pull one out and go its ok get your test light back out and start working back along the loom plugs till you find a point where you have power and fix the break |
|
| Author: | Virt [ Mon May 27, 2013 11:10 am ] |
| Post subject: | Re: no power to coil pack |
By coil pack I'm assuming you mean the ignition coil to the dizzy? |
|
| Author: | tanshi [ Mon May 27, 2013 11:13 am ] |
| Post subject: | Re: no power to coil pack |
coilpack as in coilpack probably. i.e the 13bb, j20a, or g16b with no dizzys |
|
| Author: | Virt [ Mon May 27, 2013 12:21 pm ] |
| Post subject: | Re: no power to coil pack |
Yeah I suspected but then thought that the 89 vits would be Dizzy. If it is coil packs, there should be constant power to the packs when ignition is switched on, it should be the black wire with the white stripe from memory, if the pack isn't firing I would chase the signal wire to the computer and make sure it isn't broken, if your crank angle sensor isn't working I would expect to see no spark at all. There should be 3 wires on the coil pack connectors, one will be power, one will be ground and one will be signal from the ECU. Hope that helps and I hope my memory serves! |
|
| Author: | Davidmacca [ Mon May 27, 2013 6:39 pm ] |
| Post subject: | Re: no power to coil pack |
We sorted it out, ended up being a faulty switch for a aftermarket kill switch |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|