auszookers.com
https://auszookers.com/forum/

Who can do diagnostics in Brissy???????????
https://auszookers.com/forum/viewtopic.php?f=5&t=41092		 Page 1 of 2
Author:  twitchy [ Sun May 26, 2013 12:37 pm ]
Post subject:  Who can do diagnostics in Brissy???????????
Need some codes checked & cleared, anyone in brissy need some alcohol for a quick scan????????????????
Author:  mrgtt34 [ Sun May 26, 2013 7:00 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
For what car?
Author:  Scrawny [ Sun May 26, 2013 7:02 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
His V6 GV
Author:  twitchy [ Mon May 27, 2013 5:58 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
What scrawn said....lol
Author:  Scrawny [ Mon May 27, 2013 6:00 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
Have you got OBD plug?
Author:  atari4x4 [ Mon May 27, 2013 6:16 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
why not DIY it? has been covered plenty of times before :wink:

viewtopic.php?f=5&t=31555&hilit=j20a+error+codes
Author:  twitchy [ Mon May 27, 2013 6:17 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
yep, but OBDII doesn't work ona normal reader, suzuki in their wisdom uses a different code the bastards.
Author:  atari4x4 [ Mon May 27, 2013 6:18 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
what about when you manually bridge the diagnostic terminal? :?
Author:  twitchy [ Mon May 27, 2013 6:23 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
FMB..... F*#ks Me Batman :rofl:
Author:  atari4x4 [ Mon May 27, 2013 6:31 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
was wondering when someone was going to suggest pulling the codes manually...
Author:  twitchy [ Sat Jun 01, 2013 6:50 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
What are the actual codes... as in how many flashs equal what code..... didn't see them in the list?
Author:  atari4x4 [ Sat Jun 01, 2013 6:55 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
Image

Image

Image

Image

Image
Author:  atari4x4 [ Sat Jun 01, 2013 6:57 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
DTC No. = code flashes eg P0130 1 flash followed by a pause then 3 flashes. repeated 3 times for each error.
Author:  twitchy [ Sat Jun 01, 2013 7:04 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
I got that bit thanks Atari, but in moron for me, when I bridge it manually & the engine light flashs, say 2 long one short. how do I decipher that bit???
Author:  atari4x4 [ Sat Jun 01, 2013 7:17 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
atari4x4 wrote:
DTC No. = code flashes eg P0130 1 flash followed by a pause then 3 flashes. repeated 3 times for each error.
Author:  twitchy [ Sat Jun 01, 2013 8:03 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
sweet, thanks mate
Author:  Rhinoman [ Sun Jun 02, 2013 5:24 am ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
atari4x4 wrote:
DTC No. = code flashes eg P0130 1 flash followed by a pause then 3 flashes. repeated 3 times for each error.



I thought that with the CEL method you only got the codes in brackets, ie 21 = TPS.
Author:  atari4x4 [ Sun Jun 02, 2013 10:38 am ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
:oops: was rather drunk & wasted last night, yeah it's the bracketed codes. Image :beer:
Author:  Blakey [ Sun Jun 02, 2013 10:53 am ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
twitchy wrote:
yep, but OBDII doesn't work ona normal reader, suzuki in their wisdom uses a different code the bastards.


what you talking bout i have a 05 jimny with a OBD2 port and it works fine on my reader. so they havent done that to all suzuki's if they have
Author:  atari4x4 [ Sun Jun 02, 2013 10:57 am ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
Blakey wrote:
twitchy wrote:
yep, but OBDII doesn't work ona normal reader, suzuki in their wisdom uses a different code the bastards.


what you talking bout i have a 05 jimny with a OBD2 port and it works fine on my reader. so they havent done that to all suzuki's if they have


i know the SV's use a different protocol & i'm pretty sure it carried over to the SQ.
Author:  twitchy [ Sun Jun 02, 2013 4:57 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
atari4x4 wrote:
Blakey wrote:
twitchy wrote:
yep, but OBDII doesn't work ona normal reader, suzuki in their wisdom uses a different code the bastards.


what you talking bout i have a 05 jimny with a OBD2 port and it works fine on my reader. so they havent done that to all suzuki's if they have


i know the SV's use a different protocol & i'm pretty sure it carried over to the SQ.


You're Right Atari, they are different... pricks :(
Author:  Rhinoman [ Sun Jun 02, 2013 7:59 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
Suzuki use the same protocol worldwide, EOBD or OBD2 is actually an 'extra' feature in markets where its mandatory and is limited to the legal minimum capability. Australia mandated EOBD in 2006.
Author:  losfer [ Mon Jun 03, 2013 6:56 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
rhinoman is 100% correct , cause he knows his shit .

any code that can be read by manual flash codes will only be displayed as a 2 digit number
Author:  twitchy [ Mon Jun 03, 2013 7:15 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
So do we have EOBD in The GV because I can tyell you sure as fuck mine can't be read on OBD2.
Author:  losfer [ Mon Jun 03, 2013 7:43 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
OBD scanners are a funny thing and im not as learned as rhinoman in these sort of things but i can tell you this .

I have 2 scanners , one is a $350 cheapy and one is a top of the range up to date $12000 scanner with 11ty million keys and adaptors for any car on the market.

the protocol both scanners use are different , the cheapy scanner will only work on vehicles 2005 onwards , will not work on every vehicle , but will work on most and display the data you need to see what the problem is . the expensive scanner will work on any car that doesnt have manual flash codes available , but would not hook up to a 1.9 tdi vitara recently (even though it was updated for that specific reason) yet the cheap scanner nailed the issue.
Author:  Bugsta [ Tue Jun 04, 2013 10:48 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
I stopped in at Super Cheap Lawnton Grand Reopening on Saturday. Bosch had a little tent there offering free scans, and they said "Bring your car in". Half hour later, they gave up after finding no Jimny or engine type to suit, even when doing a wide scan. Needless to say, my car drew quite a few people keen to know what I had done to it.
Author:  gypsy [ Thu Jun 06, 2013 11:40 am ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
I can scan it
Author:  twitchy [ Mon Jun 10, 2013 11:34 am ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
Ahhh Gypsy.... thought you were away champ....lol.
PM me ya number again bud. New phone.
Author:  Scrawny [ Mon Jun 10, 2013 11:39 am ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
pompoms :thefinger:
Author:  twitchy [ Mon Jun 10, 2013 12:37 pm ]
Post subject:  Re: Who can do diagnostics in Brissy???????????
O.K. Pulled them manually & have this list :(
code 17... Can't find it on the list.
23....intake air temp sensor circuit high imput... cure???
26....Bank 2 sensor 1 HO2 sensor rooted....... Replaced.
46..... Can't find it either.
Page 1 of 2 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/