Thats the one
| auszookers.com https://auszookers.com/forum/ |
|
| Bullbars https://auszookers.com/forum/viewtopic.php?f=5&t=41113 |
Page 1 of 1 |
| Author: | ozhummer [ Mon May 27, 2013 5:12 pm ] |
| Post subject: | Bullbars |
Has anyone attempted to modify (chop) a bullbar for a different car to fit onto a Vitara ? I'm thinking that at $1200 for a pretty agricultural ARB bar, is a lot compared to say a Roo Systems, or Tigerz11 delux bar that are about half the price .. Prob being these guys only make bars for the most common 4bs .. The Vit is pretty simple in that it’s straight in the front, width would be easy, its all the angles that would need to be made ..?? |
|
| Author: | Scrawny [ Mon May 27, 2013 6:07 pm ] |
| Post subject: | Re: Bullbars |
Who was it that cut and shut a Patrol(?) one to fit the front of their Suzuki a few years back? I have vague recollections of a thread from another forum |
|
| Author: | BRAD [ Mon May 27, 2013 6:23 pm ] |
| Post subject: | Re: Bullbars |
yeah i remember someone on here put a surf bar on width was pretty much perfect |
|
| Author: | atari4x4 [ Mon May 27, 2013 6:34 pm ] |
| Post subject: | Re: Bullbars |
shabz, has a hilux bar on the front of his GV & there was a white SWB vitara that had a cut down landcruiser ARB bar + joeblow's ARB rear bar on the yellow thing and the ARB bar on kenn's LJ is also a chop job. |
|
| Author: | Chop [ Mon May 27, 2013 6:40 pm ] |
| Post subject: | Re: Bullbars |
And wasn't there the red monstrosity on the jimny or sierra of the bright eyes loom rip off artist? |
|
| Author: | atari4x4 [ Mon May 27, 2013 6:42 pm ] |
| Post subject: | Re: Bullbars |
that was a sierra bar on a jimny something like VL2DY4, was oxygentheif's old sierra? |
|
| Author: | Chop [ Mon May 27, 2013 6:47 pm ] |
| Post subject: | Re: Bullbars |
Thats the one
|
|
| Author: | shabz [ Mon May 27, 2013 6:53 pm ] |
| Post subject: | Re: Bullbars |
atari4x4 wrote: shabz, has a hilux bar on the front of his GV & there was a white SWB vitara that had a cut down landcruiser ARB bar + joeblow's ARB rear bar on the yellow thing and the ARB bar on kenn's LJ is also a chop job. Used to. Big kangaroo took care of that one.  Got an ECB one now 
|
|
| Author: | joeblow [ Mon May 27, 2013 6:56 pm ] |
| Post subject: | Re: Bullbars |
ozhummer wrote: Has anyone attempted to modify (chop) a bullbar for a different car to fit onto a Vitara ? I'm thinking that at $1200 for a pretty agricultural ARB bar, is a lot compared to say a Roo Systems, or Tigerz11 delux bar that are about half the price .. Prob being these guys only make bars for the most common 4bs .. The Vit is pretty simple in that it’s straight in the front, width would be easy, its all the angles that would need to be made ..?? Of course they are half the price Roothy.....sorry....ozhummer. Anything copied is cheap to make. Looking forward to your build. 
|
|
| Author: | atari4x4 [ Mon May 27, 2013 6:57 pm ] |
| Post subject: | Re: Bullbars |
shabz wrote: atari4x4 wrote: shabz, has a hilux bar on the front of his GV & there was a white SWB vitara that had a cut down landcruiser ARB bar + joeblow's ARB rear bar on the yellow thing and the ARB bar on kenn's LJ is also a chop job. Used to. Big kangaroo took care of that one. Got an ECB one now cheers skip 
|
|
| Author: | joel [ Mon May 27, 2013 7:44 pm ] |
| Post subject: | Re: Bullbars |
joeblow wrote: ozhummer wrote: Has anyone attempted to modify (chop) a bullbar for a different car to fit onto a Vitara ? I'm thinking that at $1200 for a pretty agricultural ARB bar, is a lot compared to say a Roo Systems, or Tigerz11 delux bar that are about half the price .. Prob being these guys only make bars for the most common 4bs .. The Vit is pretty simple in that it’s straight in the front, width would be easy, its all the angles that would need to be made ..?? Of course they are half the price Roothy.....sorry....ozhummer. Anything copied is cheap to make. Looking forward to your build. if you are going to mod a bar... why not just make one from scratch?? be just as much work and wont be some emg crap hanging off the front. |
|
| Author: | Joe [ Mon May 27, 2013 8:18 pm ] |
| Post subject: | Re: Bullbars |
atari4x4 wrote: that was a sierra bar on a jimny something like VL2DY4, was oxygentheif's old sierra? Jimny bar on a sierra 
|
|
| Author: | atari4x4 [ Mon May 27, 2013 8:25 pm ] |
| Post subject: | Re: Bullbars |
Joe wrote: atari4x4 wrote: that was a sierra bar on a jimny something like VL2DY4, was oxygentheif's old sierra? Jimny bar on a sierra  minor details sheesh
|
|
| Author: | VitNick [ Mon May 27, 2013 8:38 pm ] |
| Post subject: | Re: Bullbars |
I'm in the process of making a bar off an old Hilux fit, can't remember the exact year model tho. Its almost spot on for width, but the mounting points are too close together so will cut and re-weld them. Sorry I can't remember how to use the img tag but have attached it if it helps. [img]C:/Users/NICK's/Pictures/bar.jpg[/img] |
|
| Author: | atari4x4 [ Mon May 27, 2013 8:54 pm ] |
| Post subject: | Re: Bullbars |
that bar is too flat for the front of the vitara, the wings need to taper back more so it's less slab looking. |
|
| Author: | VitNick [ Mon May 27, 2013 8:59 pm ] |
| Post subject: | Re: Bullbars |
Thanks Atari, I was thinking that as well. Was going to cut a wedge shape out of the wings, to allow me to fold the wings back more. May also do the same but closer to the hoop so there is less of a slab front to it. Will also allow the winch to fit behind it nicer |
|
| Author: | atari4x4 [ Mon May 27, 2013 9:08 pm ] |
| Post subject: | Re: Bullbars |
yeah, it won't need much... just something to give it a bit more shape |
|
| Author: | Scales [ Tue May 28, 2013 6:14 am ] |
| Post subject: | Re: Bullbars |
vitnick, you got the img tag perfect mate. But you cant reference a file on your hard drive, gotta upload it somewhere man and link to that. |
|
| Author: | jdk81 [ Tue May 28, 2013 7:35 am ] |
| Post subject: | Re: Bullbars |
Off topic Scales wrote: vitnick, you got the img tag perfect mate. But you cant reference a file on your hard drive, gotta upload it somewhere man and link to that. I feel bad for the technopeasant but I LOLed when I saw his link |
|
| Author: | ozhummer [ Tue May 28, 2013 8:02 am ] |
| Post subject: | Re: Bullbars |
My build is nearly finished! Just need a bar and rims/tyres which are prooving difficult to find |
|
| Author: | ozhummer [ Fri May 31, 2013 6:38 am ] |
| Post subject: | Re: Bullbars |
Did a lot of research yesterday and this is what I found: A bar that is almost perfect in every width, shape, size is from the Landcruiser 75/79 series. Hoops are in the wrong place, so would need to be cut off and fabricated or just left off. Ironman bullbars are as this as paper and more expensive than ARB - and not made here . Roo Systems and Tigerz11 have 75 series delux bars for $888, with driving lights. But need a lot of cutting as the hoops and uprights are thick .. great bar though. ARB have Vit bars in stock in Melbourne but quoted 2 weeks for delivery to Bris and would not move on this - would not even let me pay for a courier... I can get stuff from the east cost of the USA in 2 days ! I am really over ARB - The guy also tries to tell me the 92 SWB Vitara Softtop was available in a 3L V6 ! - he was right, I was just a stupid customer ( I want that car!) So here is what I am going to do ..... Put on the standard bumper, and polish up my nuge bar .. the bull bar can wait ... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|