Hey guys, looking for someone who's able to fab up a bull bar for my 94 Samurai and possibly later on some external bar work.
Or if anyone knows any good local suppliers of bars that don't cost an arm, leg and first born child
Cheers!
| auszookers.com https://auszookers.com/forum/ |
|
| Custom bar work in Perth https://auszookers.com/forum/viewtopic.php?f=5&t=41136 |
Page 1 of 1 |
| Author: | Virt [ Wed May 29, 2013 1:08 pm ] |
| Post subject: | Custom bar work in Perth |
Hey guys, looking for someone who's able to fab up a bull bar for my 94 Samurai and possibly later on some external bar work. Or if anyone knows any good local suppliers of bars that don't cost an arm, leg and first born child Cheers! |
|
| Author: | Fatzook [ Wed May 29, 2013 1:27 pm ] |
| Post subject: | Re: Custom bar work in Perth |
Custom = $$$ There are a couple good ones though. The perthians will chime in soon. |
|
| Author: | Red89 [ Wed May 29, 2013 1:28 pm ] |
| Post subject: | Re: Custom bar work in Perth |
Custom barwork that is any good won't be cheap either, try xlr8. |
|
| Author: | WAS12A [ Wed May 29, 2013 1:35 pm ] |
| Post subject: | Re: Custom bar work in Perth |
http://www.bradstacyfabrication.com.au/ |
|
| Author: | Virt [ Wed May 29, 2013 1:53 pm ] |
| Post subject: | Re: Custom bar work in Perth |
Thanks for the info so far! So you guys reckon I might even be better off buying something already made? I do have a thing for this beasty from the states: http://www.rocky-road.com/samurai-front ... eluxe.html Anyone had experience with them? shipping? 350 for the bar and maybe 150 shipping? |
|
| Author: | Fatzook [ Wed May 29, 2013 2:12 pm ] |
| Post subject: | Re: Custom bar work in Perth |
That bar ...... 
|
|
| Author: | bakerboy [ Wed May 29, 2013 2:18 pm ] |
| Post subject: | Re: Custom bar work in Perth |
Mike at XLR8 Fabrication get's my vote, has made my sliders and winch cradle. |
|
| Author: | madmacca [ Wed May 29, 2013 2:22 pm ] |
| Post subject: | Re: Custom bar work in Perth |
Red89 wrote: Custom barwork that is any good won't be cheap either, try xlr8. x2 Mike does some nice work http://www.xlr8fabrications.com/ |
|
| Author: | Virt [ Wed May 29, 2013 2:48 pm ] |
| Post subject: | Re: Custom bar work in Perth |
Fatzook wrote: That bar ...... Really? I thought it looked pretty good... each to his own I guess Will give XLR8 a ring then and see what they have to say! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|