| auszookers.com https://auszookers.com/forum/ |
|
| tough dog 2" lift kit is 30mm is this correct https://auszookers.com/forum/viewtopic.php?f=5&t=41165 |
Page 1 of 1 |
| Author: | DAB [ Fri May 31, 2013 10:07 am ] |
| Post subject: | tough dog 2" lift kit is 30mm is this correct |
just phone to order my kit and bloje says its only 30mm lift kit as 2" isnt listed for a swb 1995 vitara. l do I order it or not? am I getting ripped off again? is it really that hard to get 2" lift kit for a vitara by Wednesday for less then $1000? I dont wanna order it to find out I made a mistake. cant afford to any advise please? |
|
| Author: | Chop [ Fri May 31, 2013 12:27 pm ] |
| Post subject: | Re: tough dog 2" lift kit is 30mm is this correct |
If you still have original suspension in your most likely to have sagged lower suspension to begin with. Most find that combined with new springs can result in bigger than 2" lift. Alot of the manufacturers won't state 2" definite lift because there are alot of different factors to change final ride height. |
|
| Author: | DAB [ Fri May 31, 2013 12:32 pm ] |
| Post subject: | Re: tough dog 2" lift kit is 30mm is this correct |
thank you chop. after doing a little research ive desided to go with dobinson lift kit. 40mm and im getting grand vitara front springs. plus camba adjustment bolts for less than $1k should be here tuesday/Wednesday |
|
| Author: | joeblow [ Fri May 31, 2013 1:37 pm ] |
| Post subject: | Re: tough dog 2" lift kit is 30mm is this correct |
Then order a kit to suit a 5 door. |
|
| Author: | DAB [ Fri May 31, 2013 2:41 pm ] |
| Post subject: | Re: tough dog 2" lift kit is 30mm is this correct |
will the 5 door kit go on a 2door? |
|
| Author: | atari4x4 [ Fri May 31, 2013 2:43 pm ] |
| Post subject: | Re: tough dog 2" lift kit is 30mm is this correct |
yeah. |
|
| Author: | DAB [ Fri May 31, 2013 2:45 pm ] |
| Post subject: | Re: tough dog 2" lift kit is 30mm is this correct |
kool thanks |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|