| auszookers.com https://auszookers.com/forum/ |
|
| 1.0l transfer stuck in low range. https://auszookers.com/forum/viewtopic.php?f=5&t=41166 |
Page 1 of 1 |
| Author: | deralic22 [ Fri May 31, 2013 12:51 pm ] |
| Post subject: | 1.0l transfer stuck in low range. |
I have a friend with a 1LT and it is stuck in lowrange it physically will not move what could be the problem peeps? |
|
| Author: | want33s [ Fri May 31, 2013 1:00 pm ] |
| Post subject: | Re: 1.0l transfer stuck in low range. |
Most likely the bush under the shifter called a shifter sheet, BUT it could be any number of things from axle windup to broken transfer. |
|
| Author: | misko [ Sat Jun 01, 2013 6:31 pm ] |
| Post subject: | Re: 1.0l transfer stuck in low range. |
Has he taken the shifter leaver out then put it back in by anychance? |
|
| Author: | deralic22 [ Mon Jun 03, 2013 12:49 pm ] |
| Post subject: | Re: 1.0l transfer stuck in low range. |
It was like that when he got it.. |
|
| Author: | 2stroker [ Mon Jun 03, 2013 3:42 pm ] |
| Post subject: | Re: 1.0l transfer stuck in low range. |
Is he in Australia |
|
| Author: | deralic22 [ Tue Jun 04, 2013 9:03 am ] |
| Post subject: | Re: 1.0l transfer stuck in low range. |
yeah he is |
|
| Author: | want33s [ Tue Jun 04, 2013 9:30 am ] |
| Post subject: | Re: 1.0l transfer stuck in low range. |
I just re-read the OP. Is the car stuck and won't move or is it just the transfer stick? |
|
| Author: | 2stroker [ Tue Jun 04, 2013 2:43 pm ] |
| Post subject: | Re: 1.0l transfer stuck in low range. |
"Is he in Australia" means if you say where he is, or where you are for that matter, one of us close by may offer to come and have a look for him. |
|
| Author: | deralic22 [ Wed Jun 05, 2013 9:36 am ] |
| Post subject: | Re: 1.0l transfer stuck in low range. |
no car goes just stuck in low range an he lives in woodburn northern nsw not to many zook people round there i dont think.. |
|
| Author: | HarryHoudini [ Wed Jun 05, 2013 10:01 am ] |
| Post subject: | Re: 1.0l transfer stuck in low range. |
There are heaps around in Grafton,Lismore,Ballina,Byron etc., just not on this Forum. |
|
| Author: | want33s [ Wed Jun 05, 2013 10:13 am ] |
| Post subject: | Re: 1.0l transfer stuck in low range. |
Tell your mate to remove the transfer shift stick and check the condition of the bush and the shift rod alignment. Transfer bush should look like this but by the time you get it out will actually look more like a small handful of gravel.  New transfer shifter sheets are available from Lowrangeoffroad or Spidertrax or Suzuki. |
|
| Author: | sideways [ Wed Jun 05, 2013 12:31 pm ] |
| Post subject: | Re: 1.0l transfer stuck in low range. |
If it's a non-switch transfer you'l have trouble finding a new bush, late model ones don't fit. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|