auszookers.com
https://auszookers.com/forum/

Radiator differences
https://auszookers.com/forum/viewtopic.php?f=5&t=41204
Page 1 of 1

Author:  billygoat [ Sun Jun 02, 2013 5:51 pm ]
Post subject:  Radiator differences

Is there any or much differences between leaf spring 96 & coil spring 96 Radiators? Need help fast Please. :hey:

Author:  Gwagensteve [ Sun Jun 02, 2013 5:56 pm ]
Post subject:  Re: Radiator differences

Not AFAIK. I think the very last leaf radiators were plastic tanked/alloy finned like the coil radiators.

Steve.

Author:  billygoat [ Sun Jun 02, 2013 6:03 pm ]
Post subject:  Re: Radiator differences

My radiator is leaking at the point where the plastic top tank meets the core. I have found a radiator on ebay but its for a 96 leaf spring. Any idea if it will fit easily? We are heading to Cape York on Friday so need to sort this out super fast. Thankyou very much.

Author:  want33s [ Sun Jun 02, 2013 6:46 pm ]
Post subject:  Re: Radiator differences

The rads are same core size and basically same tank setup but coily mount bolt holes are spaced a little differently.
The holes aren't far out and they will interchange without much drama.

Author:  billygoat [ Sun Jun 02, 2013 8:21 pm ]
Post subject:  Re: Radiator differences

Awesome thanks guys.

Author:  losfer [ Mon Jun 03, 2013 7:00 pm ]
Post subject:  Re: Radiator differences

you will need to change the fan shroud to a sj70 shroud as well they attach differently.

Author:  2stroker [ Tue Jun 04, 2013 2:45 pm ]
Post subject:  Re: Radiator differences

Where are you, I have 3 radiators, north brisbane.

Author:  billygoat [ Thu Jun 06, 2013 6:53 pm ]
Post subject:  Re: Radiator differences

All good. Radiator fitted just fine, no dramas at all. I have GTI engine & run a thermo fan. So no need for shroud. Cape York trip starts tomorrow. New Kumo mud tyres fitted today. Woohoo will post pics on here upon our return.

Author:  fordem [ Thu Jun 06, 2013 10:54 pm ]
Post subject:  Re: Radiator differences

billygoat wrote:
I ... run a thermo fan. So no need for shroud


Let's hope you're right - in my experience, thermo fans work better with shrouds.

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/