as i said, good luck with that... have you seen how many wanted ads come up for vitara bars vs vitara bar's for sale? they're not that common & are pretty sought after.
you do the math.
| auszookers.com https://auszookers.com/forum/ |
|
| swb vitara winch bull bars https://auszookers.com/forum/viewtopic.php?f=5&t=41234 |
Page 1 of 1 |
| Author: | DAB [ Tue Jun 04, 2013 3:34 pm ] |
| Post subject: | swb vitara winch bull bars |
ok. ive heard alot of story's of bull bars for these things. cheapest ive cone across so far is ARB at $1200. ive heard of using hilux bars and cutting them to shape ive heard of making up your own. has anyone got any idea of company's that do a half decent CHEAP bar. Unfortunately I dont have the facilities to make my own or cut one up. and im sure im not the only one? maybe someone here has done a few now and wants to earn some money? all valid point of discussion your thoughts please. kind regards DAB |
|
| Author: | DarkHorse [ Tue Jun 04, 2013 9:08 pm ] |
| Post subject: | Re: swb vitara winch bull bars |
Depends what style you want... The ARB/ECB/TJM ones come up second hand every now and again. The LWB and SWB bars are the same shape, just different brackets to mount them. 2.0L should be the same too. Otherwise you could get a tube bar custom made, should be somewhat cheaper than the retail sheet metal options. What's your definition of cheap? |
|
| Author: | DAB [ Tue Jun 04, 2013 9:21 pm ] |
| Post subject: | Re: swb vitara winch bull bars |
for a bar that does the job and looks ok which is winch compatible id probably go upto $500...but it would have to quality not tear itself apart if first recovery |
|
| Author: | atari4x4 [ Tue Jun 04, 2013 9:26 pm ] |
| Post subject: | Re: swb vitara winch bull bars |
good luck with that. |
|
| Author: | DAB [ Tue Jun 04, 2013 9:27 pm ] |
| Post subject: | Re: swb vitara winch bull bars |
for a second hand bar, sound be plenty..... |
|
| Author: | atari4x4 [ Tue Jun 04, 2013 9:33 pm ] |
| Post subject: | Re: swb vitara winch bull bars |
as i said, good luck with that... have you seen how many wanted ads come up for vitara bars vs vitara bar's for sale? they're not that common & are pretty sought after. you do the math.
|
|
| Author: | DarkHorse [ Wed Jun 05, 2013 8:36 pm ] |
| Post subject: | Re: swb vitara winch bull bars |
If you get a second hand one for $500 you're doing well. That's what I paid for mine, and I've rarely seen them cheaper. You've said yourself - at least $1200 new... |
|
| Author: | Fatzook [ Wed Jun 05, 2013 10:26 pm ] |
| Post subject: | Re: swb vitara winch bull bars |
What they said ^^^^. Be prepared to increase your budget & wait for a while. |
|
| Author: | sideways [ Wed Jun 05, 2013 10:43 pm ] |
| Post subject: | Re: swb vitara winch bull bars |
X2 An unfortunate side effect of zook owners being tight arses is not many things like this got bought in the first place and there's always a bunch of people after secondhand stuff. |
|
| Author: | ozhummer [ Thu Jun 06, 2013 6:42 am ] |
| Post subject: | Re: swb vitara winch bull bars |
Ive just been through the excersise of trying to find a near fit bar to mod for my SWB Resto Vit. I found the best bar, fit wise, was the 75/79 series Toyota. Width is almost perfect, front shape is almost perfect, the wing size is, almost perfect too - Where it is totally crap is in the hoops. They would need to be cut off and new ones put on. I looked at the Tigerz11 delux bar for $888 which would be really nice with the driving lights and led indicators. Problem is, there is just too much in the way of loop and would require a whole lot of cutting and filling. And you would need to cut the mounting brackets off and make new ones. In the end it's just too much work. So I've ordered the $1150 ARB one. I'll see about trying to fit dricing lights, but at least I now know it will fit. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|