New wheel aligner.... Problem solved
| auszookers.com https://auszookers.com/forum/ |
|
| Help! Jimny ome lift, fulcrum bushes and 225s https://auszookers.com/forum/viewtopic.php?f=5&t=41262 |
Page 1 of 1 |
| Author: | iambob [ Wed Jun 05, 2013 7:33 pm ] |
| Post subject: | Help! Jimny ome lift, fulcrum bushes and 225s |
Hey everyone Recently bought a 2012 jimny and have got a 40mm ome lift with superpro adjustable bushes.. Also have 225 70 15s on neg 23 offset 15x8s. It's all in and looking right however my wheel aligner can't get It right. The tyres still scrub and the alignment can't even get close to manufacturer specs. I've called everyone from suspension shops, 4x4 shops, fulcrum and arb... Know one has seen it before Can anyone help me with what might be causing it? Cheers |
|
| Author: | atari4x4 [ Wed Jun 05, 2013 7:41 pm ] |
| Post subject: | Re: Help! Jimny ome lift, fulcrum bushes and 225s |
what specs on the wheel alignment are out & where are the tyres "scrubbing"? caster? toe? |
|
| Author: | christover1 [ Wed Jun 05, 2013 7:43 pm ] |
| Post subject: | Re: Help! Jimny ome lift, fulcrum bushes and 225s |
Any photos? Is it towing in, towing out, a caster or camber problem. I don't know Jimnies, but those that do will need more info, to offer good advice |
|
| Author: | iambob [ Wed Jun 05, 2013 7:58 pm ] |
| Post subject: | Re: Help! Jimny ome lift, fulcrum bushes and 225s |
Sorry for the lack of info, I know he's struggling to get out of negative caster Unsure at this stage how the toe and camber are measuring up... I will try to get a hold of the measurements for this tomorrow Also, tyres still scrubbing on front bar which I thought that wheel and tyre combo with the lift should clear. Thanks for the speedy replies! |
|
| Author: | atari4x4 [ Wed Jun 05, 2013 8:01 pm ] |
| Post subject: | Re: Help! Jimny ome lift, fulcrum bushes and 225s |
camber isn't adjustable on a live axle vehicle & caster should be in the positive range, not sure on the actual figure... a jimny owner will be able to answer that. just wondering if the offset bushes been installed correctly? |
|
| Author: | sjzook [ Wed Jun 05, 2013 8:05 pm ] |
| Post subject: | Re: Help! Jimny ome lift, fulcrum bushes and 225s |
-23 is still pretty decent offset, I ran -13 never had an issue |
|
| Author: | atari4x4 [ Wed Jun 05, 2013 8:08 pm ] |
| Post subject: | Re: Help! Jimny ome lift, fulcrum bushes and 225s |
missed the -23 bit... that offset is going to cause scrubbing issues everywhere. |
|
| Author: | iambob [ Wed Jun 05, 2013 8:23 pm ] |
| Post subject: | Re: Help! Jimny ome lift, fulcrum bushes and 225s |
New wheel aligner.... Problem solved
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|