Pics would halp heaps
| auszookers.com https://auszookers.com/forum/ |
|
| Transfer case drop bracket ??? https://auszookers.com/forum/viewtopic.php?f=5&t=41395 |
Page 1 of 1 |
| Author: | Chairman [ Thu Jun 13, 2013 2:53 pm ] |
| Post subject: | Transfer case drop bracket ??? |
Can anyone tell me what is the point of a transfer case drop bracket ? I got one with my 2" FTS suspension lift kit but never installed the bracket when we put the suspension in. Seems to run fine so far 8 months later.. It got me thinking tho whats the use for it ? An will i be slowly wreaking any drive train with out it in. Cheers |
|
| Author: | tanshi [ Thu Jun 13, 2013 2:58 pm ] |
| Post subject: | Re: Transfer case drop bracket ??? |
never heard of a transfer case drop, are you sure you dont mean diff drop bracket? |
|
| Author: | Red89 [ Thu Jun 13, 2013 3:02 pm ] |
| Post subject: | Re: Transfer case drop bracket ??? |
Lifted jeeps use them to line up the driveline better and stop wobbles |
|
| Author: | atari4x4 [ Thu Jun 13, 2013 3:07 pm ] |
| Post subject: | Re: Transfer case drop bracket ??? |
Pics would halp heaps
|
|
| Author: | Chairman [ Thu Jun 13, 2013 4:37 pm ] |
| Post subject: | Re: Transfer case drop bracket ??? |
It defiantly not the a-ram ball joint spacer for the rear diff, i do have this spacer on my truck tho. I will pull a pic from the net an post it. From memory the transfer case drop bracket lowers the T/C 1". I suspect this is to re-inline the drive shaft angle to the diff and eliminate the funny slant or angle the axle case on by pushing the diff back a tad ? Of course don't quote me on this as its the only logical explanation i can think up at this stage... |
|
| Author: | Chairman [ Thu Jun 13, 2013 4:41 pm ] |
| Post subject: | Re: Transfer case drop bracket ??? |
Looks like this on a 2L v6 Vitara |
|
| Author: | Chairman [ Thu Jun 13, 2013 4:43 pm ] |
| Post subject: | Re: Transfer case drop bracket ??? |
Oh forgot to mention this is not my vit just a pic i pull from the FTS website |
|
| Author: | atari4x4 [ Thu Jun 13, 2013 4:54 pm ] |
| Post subject: | Re: Transfer case drop bracket ??? |
it's a low profile/dropped transfer case cross member, i ran one in my 2.0 SWB vitara for a few years with no drama's after destroying the standard one on a nasty rock garden... still need to transfer it over to the LWB. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|