| auszookers.com https://auszookers.com/forum/ |
|
| Swb vitara motor https://auszookers.com/forum/viewtopic.php?f=5&t=41476 |
Page 1 of 1 |
| Author: | Davidmacca [ Tue Jun 18, 2013 5:23 pm ] |
| Post subject: | Swb vitara motor |
My head is blown on my g16a and I'm deciding what to do. I want to stay carby as Eli conversion is to hard, any other motors for more power I can put in ? |
|
| Author: | Scrawny [ Tue Jun 18, 2013 5:29 pm ] |
| Post subject: | Re: Swb vitara motor |
I think you'll find if EFi is too hard any other option will also fall into the same category. Only G series motors will bolt straight in, anything else will require fabrication work |
|
| Author: | Davidmacca [ Tue Jun 18, 2013 5:41 pm ] |
| Post subject: | Re: Swb vitara motor |
Yes I know but mounting isn't the problem, it's all the wiring and problems that come with it as carby is much more simple to repair, I'm just getting an idea on if their is any other option of something that has any power upgrade before I source a g16a |
|
| Author: | atari4x4 [ Tue Jun 18, 2013 5:46 pm ] |
| Post subject: | Re: Swb vitara motor |
small block chev |
|
| Author: | Scrawny [ Tue Jun 18, 2013 5:51 pm ] |
| Post subject: | Re: Swb vitara motor |
I think you'll find wiring a G16B motor would be far easier than fitting engine and gearbox from something else, especially if its just another carby motor |
|
| Author: | Davidmacca [ Tue Jun 18, 2013 6:27 pm ] |
| Post subject: | Re: Swb vitara motor |
That is a very good point, was just seeing if their was another option first, I will need to find one soon. It is still drivable for a bit longer |
|
| Author: | DAB [ Tue Jun 18, 2013 7:04 pm ] |
| Post subject: | Re: Swb vitara motor |
i have a G16A for sale if you wanna stay the same. have a list up in forum of my vitara SWB that im wrecking :0) |
|
| Author: | Davidmacca [ Tue Jun 18, 2013 7:05 pm ] |
| Post subject: | Re: Swb vitara motor |
I have seen it but I'm in brissy and don't want to freight |
|
| Author: | DAB [ Tue Jun 18, 2013 7:35 pm ] |
| Post subject: | Re: Swb vitara motor |
ah... ya I keep forgetting ro look at location lol |
|
| Author: | atari4x4 [ Tue Jun 18, 2013 7:43 pm ] |
| Post subject: | Re: Swb vitara motor |
Davidmacca wrote: I have seen it but I'm in brissy and don't want to freight can i ask why not? it's a pretty straight forward process and you'd be surprised how cheap e-go could get it to you. |
|
| Author: | Davidmacca [ Tue Jun 18, 2013 7:47 pm ] |
| Post subject: | Re: Swb vitara motor |
The weight it would cost at least $100 that I could be spending on a motor |
|
| Author: | Scrawny [ Tue Jun 18, 2013 10:02 pm ] |
| Post subject: | Re: Swb vitara motor |
My opinion so disregard as you see fit.... If you don't have the knowledge, skills and equipment to do a full blown conversion (including all fabrication work) then don't bother going down that road. You will get part way into it and loose all interest. It then becomes a pile of parts that eventually gets parted and you move onto something else. If you like the car, and want to keep it, just fix the head or replace with the same engine. If you want a bit more power then go down the EFi path. Or, strip the good bits off this one and sell it so you can buy a later model that already has EFi. Just my 2 cents worth |
|
| Author: | ozhummer [ Tue Jun 18, 2013 10:27 pm ] |
| Post subject: | Re: Swb vitara motor |
This could be an option .... http://www.youtube.com/watch?v=wjK2w-qdiXo |
|
| Author: | atari4x4 [ Wed Jun 19, 2013 12:00 am ] |
| Post subject: | Re: Swb vitara motor |
ozhummer wrote: needs to be a chev, seeing they were released as a chevy tracker atari4x4 wrote: small block chev
|
|
| Author: | ozhummer [ Wed Jun 19, 2013 9:15 pm ] |
| Post subject: | Re: Swb vitara motor |
it's good though, isn't it .... you want it don't you ........ |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|