| auszookers.com https://auszookers.com/forum/ |
|
| SJ 80 coily oil pressure sender wire https://auszookers.com/forum/viewtopic.php?f=5&t=41602 |
Page 1 of 1 |
| Author: | we_tha_ppl [ Tue Jun 25, 2013 10:03 pm ] |
| Post subject: | SJ 80 coily oil pressure sender wire |
Hey everyone, I have bought a sierra with a 13B engine conversion to my lj80 coily sierra and I can't find the original oil pressure signal wire from the coily harness.I'm not even sure where the oil pressure switch was with stock engine, I would like to hook this up to make sure it's got oil pressure with the modified pickup so if anyone can take a photo of the wire or tell me there colour/ location. Ive found a wire on the alternator loom that looks like it might be it but I extended it and hooked it up and still no light. Also do I need to install the original oil pressure switch from the sierra or will the 13b one work fine? thanks for your time and look foward to the replys! |
|
| Author: | sideways [ Tue Jun 25, 2013 10:07 pm ] |
| Post subject: | Re: Lj80 coily oil pressure sender wire |
SJ80 SJ S |
|
| Author: | we_tha_ppl [ Tue Jun 25, 2013 11:33 pm ] |
| Post subject: | Re: Lj80 coily oil pressure sender wire |
thanks for correcting that typing error, Any useful information to add at all? Thanks for your time, I guess |
|
| Author: | sideways [ Tue Jun 25, 2013 11:45 pm ] |
| Post subject: | Re: Lj80 coily oil pressure sender wire |
Sorry, you'd mentioned it a few times so I thought I should put you straight.  I can't speak for a coily, but on leaf sprung Sierras and LJs the wire is yellow with a black trace. On a Sierra (again leaf, can't speak for a coily) it comes out of the the part of the the loom that goes to to the front lights, can't remember which side a 1.3l is on though. |
|
| Author: | we_tha_ppl [ Wed Jun 26, 2013 7:48 am ] |
| Post subject: | Re: SJ 80 coily oil pressure sender wire |
Ok thanks heaps for your help, I will have a look for it tonight and let you no now I go. Cheers |
|
| Author: | Dec [ Wed Jun 26, 2013 6:19 pm ] |
| Post subject: | Re: SJ 80 coily oil pressure sender wire |
Hey man, hope this helps. Sorry for the picture quality my camera has gone walk-abouts so phone it is. It's the black connector |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|