| auszookers.com https://auszookers.com/forum/ |
|
| Can G13BA 8V with EPI install with apexi neo? https://auszookers.com/forum/viewtopic.php?f=5&t=41746 |
Page 1 of 1 |
| Author: | alvinlkk [ Fri Jul 05, 2013 11:53 pm ] |
| Post subject: | Can G13BA 8V with EPI install with apexi neo? |
hi, i have a G13BA engine comes from Japan used parts, im planning to put an Apexi Afc. please guide |
|
| Author: | want33s [ Sat Jul 06, 2013 6:26 am ] |
| Post subject: | Re: Can G13BA 8V with EPI install with apexi neo? |
http://www.nengun.com/apexi/s-afc-ii Is that what you mean? |
|
| Author: | alvinlkk [ Sat Jul 06, 2013 9:39 am ] |
| Post subject: | Re: Can G13BA 8V with EPI install with apexi neo? |
sorry, the afc in my previous post is similar to http://www.titanmotorsports.com/afcneo.html im looking for the ECU diagram of suzuki G13BA 8V engine for sierra thanks for the reply in advance |
|
| Author: | Rhinoman [ Sun Jul 07, 2013 5:29 am ] |
| Post subject: | Re: Can G13BA 8V with EPI install with apexi neo? |
Which ECU are you running? |
|
| Author: | alvinlkk [ Sun Jul 07, 2013 11:08 pm ] |
| Post subject: | Re: Can G13BA 8V with EPI install with apexi neo? |
i'll try to get the actual photo of the ECU. as i know its a 1298cc G13BA engine EPI from suzuki jimny sierra 1990 |
|
| Author: | want33s [ Mon Jul 08, 2013 7:14 am ] |
| Post subject: | Re: Can G13BA 8V with EPI install with apexi neo? |
We might be able to help with ECU pinouts but they aren't common here. We'll need the part number from it. Australia never got an EFI Sierra with a G13ba in it. |
|
| Author: | alvinlkk [ Mon Jul 08, 2013 11:52 am ] |
| Post subject: | Re: Can G13BA 8V with EPI install with apexi neo? |
this is the ECU photo taken from my car. 33920-81C10 E2T42871 T 3913 X1 DOM-MT |
|
| Author: | alvinlkk [ Mon Jul 08, 2013 12:48 pm ] |
| Post subject: | Re: Can G13BA 8V with EPI install with apexi neo? |
this is what i found so far http://rhinopower.activeboard.com/t54142634/33920-81c10/ |
|
| Author: | Rhinoman [ Mon Jul 08, 2013 5:21 pm ] |
| Post subject: | Re: Can G13BA 8V with EPI install with apexi neo? |
The EFI supplememnt for the Samurai is here: http://www.rhinoman.org/manuals/Samurai ... lement.pdf Yours should be the same although its worth checking the wire colours just to be certain. It looks like your ECU is different to the JDM ECU that I looked at in that thread which is a shame as that one was very easy to tune. |
|
| Author: | alvinlkk [ Mon Jul 08, 2013 5:38 pm ] |
| Post subject: | Re: Can G13BA 8V with EPI install with apexi neo? |
Rhinoman wrote: The EFI supplememnt for the Samurai is here: http://www.rhinoman.org/manuals/Samurai ... lement.pdf Yours should be the same although its worth checking the wire colours just to be certain. It looks like your ECU is different to the JDM ECU that I looked at in that thread which is a shame as that one was very easy to tune. thanks for the service manual. really appreciate it. will check the wire colours once it finishes downloading. what do u mean by "that one was very easy to tune"? u mean my ECU very easy to tune into more powerful? sorry. I'm very new into this thing. getting more interested into it. thanks for the help of everyone here. |
|
| Author: | Rhinoman [ Mon Jul 08, 2013 5:45 pm ] |
| Post subject: | Re: Can G13BA 8V with EPI install with apexi neo? |
You can get a small power increase from tuning on a stock ECU, you only really need a tuned ECU if you've done other engine mods. I assumed that you were going to tune your engine, its very hard to justify $500 for an Apexi on a stock engine. |
|
| Author: | youda [ Mon Jul 08, 2013 5:50 pm ] |
| Post subject: | Re: Can G13BA 8V with EPI install with apexi neo? |
Thats a mitsubishi ecu, open up the cover and see if the chip is removable, if so you can simply get a nother chipped and get it re flashed for some much better gains (well as much as you can from a tune) |
|
| Author: | Rhinoman [ Mon Jul 08, 2013 5:55 pm ] |
| Post subject: | Re: Can G13BA 8V with EPI install with apexi neo? |
youda wrote: Thats a mitsubishi ecu, open up the cover and see if the chip is removable, if so you can simply get a nother chipped and get it re flashed for some much better gains (well as much as you can from a tune) T = One Time Programmable |
|
| Author: | alvinlkk [ Mon Jul 08, 2013 6:05 pm ] |
| Post subject: | Re: Can G13BA 8V with EPI install with apexi neo? |
Rhinoman wrote: You can get a small power increase from tuning on a stock ECU, you only really need a tuned ECU if you've done other engine mods. I assumed that you were going to tune your engine, its very hard to justify $500 for an Apexi on a stock engine. actually i haven't done any mod on my engine yet. yes, i intended to increase the power on my engine. just dunno what to do. |
|
| Author: | youda [ Mon Jul 08, 2013 9:20 pm ] |
| Post subject: | Re: Can G13BA 8V with EPI install with apexi neo? |
Rhinoman wrote: youda wrote: Thats a mitsubishi ecu, open up the cover and see if the chip is removable, if so you can simply get a nother chipped and get it re flashed for some much better gains (well as much as you can from a tune) T = One Time Programmable even so, to get it epromed would only cost about $80? the real cost would be finding someone to flash tune it as i doubt it has been done much before if at all. |
|
| Author: | alvinlkk [ Wed Aug 28, 2013 4:35 pm ] |
| Post subject: | Re: Can G13BA 8V with EPI install with apexi neo? |
just installed the apexi neo on my G13BA 8V works great.. will post some pics soon. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|