| auszookers.com https://auszookers.com/forum/ |
|
| Sierra carrier questions HELP!!! https://auszookers.com/forum/viewtopic.php?f=5&t=41813 |
Page 1 of 1 |
| Author: | bh59 [ Mon Jul 08, 2013 5:52 pm ] |
| Post subject: | Sierra carrier questions HELP!!! |
will a rear carrier from a sierra bolt into a front sierra diff? I know the side gears are different so if I ordered some 22 spline gears would they be able to go straight in? story is ive ordered a locker for the front but I have a 2 pin carrier, I bought a rear diff with the 4 pin carrier but the side gears are 26 spline! SOMEONE HELP!!! |
|
| Author: | christover1 [ Mon Jul 08, 2013 9:31 pm ] |
| Post subject: | Re: Sierra carrier questions HELP!!! |
yes it can You can use an auto locker with a 2pin carrier, if you have the pin block from the 4 pin. But a 4 pin carrier is better. |
|
| Author: | shep [ Mon Jul 08, 2013 9:39 pm ] |
| Post subject: | Re: Sierra carrier questions HELP!!! |
If the locker is a 1510 lockright just put it in the 2 pin front diff. They fit and don't need any extra bits, I ran one without issue for 5 years. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|